Description
AST Removable Roll Cage BMW E30 Sedan AWD V2
The AST Removable Roll Cage BMW E30 Saloon AWD V2 is a full roll cage for the all-wheel-drive BMW E30 325iX with 4-door saloon bodywork. This Removable Roll Cage E30 Saloon AWD V2 builds on the AWD V1 and adds front reinforcement bars to the bulkhead, so that the structure continues into the front end. The cage sits on six bolting points on six welded foot plates and remains removable via connecting sleeves.
The cage is designed and built by AST Roll Cages in Spain and drawn up for the 325iX, which has its own floorpan because of its additional driven front axle and transfer case.
Key benefits
- Front reinforcement bars to the bulkhead tie the cage into the front end.
- Less torsional flex in the front end, which is all the more noticeable in the heavier 325iX.
- Specific to the all-wheel-drive E30, with foot plates positioned on the correct floor contours.
- Six welded foot plates in 3 mm steel, custom-designed for each car.
- Removable via connecting sleeves between the individual sections.
- E355 steel with a 45 mm main hoop and remaining tubes of 40 mm.
- Supplied complete with reinforcement plates, bolts, washers, nuts, documentation, fitting instructions and a sticker set.
- Available for cars with and without a sunroof – you choose this when ordering
Suitable for
BMW E30 3 Series, 4-door saloon, all-wheel-drive 325iX
- BMW E30 3 Series 4-door saloon with all-wheel drive (325iX)
- Does not fit the rear-wheel-drive E30; a separate RWD version is available for that model
- Type: full roll cage, version V2
- Drifting, track use and rallying
Technical specifications
- Manufacturer: AST Roll Cages
- Manufacturer part number: CMBN00299
- Headlining: for roofs with headlining
- Rear anchorage: at the wheel arch
- Rear structure layout: X design
- Type: full roll cage, removable via connecting sleeves
- Main hoop: E355 steel, 45 mm diameter
- Secondary structure: E355 steel, 40 mm diameter
- Foot plates: 3 mm steel, custom-designed for each car
- Mounting: 6 bolting points on 6 welded foot plates
- Drive: all-wheel drive (AWD, 325iX)
- Weight: 210 kg (manufacturer’s figure)
- Finish: welded and unpainted, split into sections via connecting sleeves
- Included: welded structure, connecting sleeves, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set
Fitting and delivery
The cage is built to order; the standard delivery time is 15 to 35 working days. The six foot plates are welded to the bodyshell by a specialist, after which the cage is bolted onto them. With this version, pay attention to routing the front bars through to the bulkhead, especially in combination with the wiring for the all-wheel-drive system. AST digitises the bodyshell with laser scanners and designs the cage in 3D, so that it fits your 325iX exactly.
The front bars connect the cage to the front end, exactly where a heavier 325iX gains the most.
Why choose this Removable Roll Cage E30 Saloon AWD V2?
A 325iX weighs more than a regular E30 and carries that mass mainly over the front end. The bars to the bulkhead anchor the cage right where that load comes in, which makes the steering more settled. So you gain both safety and chassis rigidity in one go, and the cage remains fully removable.
Frequently asked questions
What is the difference from the AWD V1?
This Removable Roll Cage E30 Saloon AWD V2 has front reinforcement bars towards the bulkhead, which the V1 does not have. The rest of the construction, with six bolting points on six welded foot plates, is identical.
Does this cage fit a rear-wheel-drive E30?
No, this version is exclusively for the all-wheel-drive E30 325iX Saloon. There is a separate RWD version for the rear-wheel-drive E30.
How is the cage mounted?
Six foot plates of 3 mm steel are welded to the bodyshell. The cage itself is secured to those plates at six bolting points and can be removed again via the connecting sleeves.
What if my car has a sunroof?
When ordering, please state whether your car has a sunroof, and AST will tailor the roll cage accordingly.
What is the delivery time?
The standard delivery time for this roll cage is 15 to 35 working days.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.








Reviews
There are no reviews yet.