Shop

Description

AST Removable Roll Cage BMW E39 Sedan V1

The AST Removable Roll Cage BMW E39 Sedan V1 is a full roll cage for the BMW 5 Series E39 with 4-door saloon bodywork. This Removable Roll Cage E39 Sedan V1 covers both the front and rear compartments and is the entry-level version in the removable range.

The cage is designed and built by AST Roll Cages in Spain, for owners who want a full cage but also want to keep the option of returning the car to a usable condition.

Key benefits

• Entire cabin protected: the structure runs through both the front and rear compartments.
• Removable: the sections can be separated via connecting sleeves and the cage is bolted in.
• Six welded foot plates: six bolting points spread the loads across the floor and the pillars.
• E355 steel: 45 mm main hoop, rest of the structure 40 mm.
• Digitally measured: AST scans the E39 bodyshell and designs the cage in 3D.
• Affordable entry level: the most cost-effective way to get a full AST cage into your E39.
• Supplied complete: reinforcement plates, mounting hardware and fitting instructions are included.

Suitable for

BMW 5 Series E39, 4-door saloon

• BMW E39 5 Series saloon, built 1995 to 2003
• Type: full roll cage, removable, version V1
• Drifting, track use and rallying

Technical specifications

• Manufacturer: AST Roll Cages
• Manufacturer part number: CMBN07273
• Sunroof: for roofs without a sunroof
• Headlining: for roofs without headlining
• Rear anchorage: in the boot area
• Type: full roll cage, removable via connecting sleeves
• Main hoop: E355 steel, 45 mm diameter
• Secondary structure: E355 steel, 40 mm diameter
• Foot plates: 3 mm steel, custom-designed for each car
• Mounting: 6 bolting points on 6 foot plates welded to the bodyshell
• Weight: 210 kg (manufacturer’s figure)
• Finish: welded and unpainted, split into sections via connecting sleeves
• Included: welded structure, connecting sleeves, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set

Fitting and delivery

The cage is built to order; the standard delivery time is 15 to 35 working days. The six foot plates are welded to the bodyshell and the cage is then bolted onto them. As the structure also runs through the front compartment, the dashboard area must be cleared before you start.

A full AST cage for your E39 saloon that you can also take out of the car again thanks to the connecting sleeves.

Why choose this Removable Roll Cage E39 Sedan V1?

A welded-in cage is permanent; this one is not. You get the protection of a full structure, but the cage remains removable for transport, maintenance or a later rebuild. AST digitises the bodyshell with laser scanners and designs the cage in 3D, so that all the sections slot together smoothly during assembly.

Frequently asked questions

What exactly does ‘removable’ mean?

The Removable Roll Cage E39 Sedan V1 consists of sections that are joined by connecting sleeves and bolted to the foot plates. This means you can dismantle the cage again; the welded foot plates stay in the car.

Does AST also offer a version for the Touring?

No, for the E39, AST only builds for the four-door saloon. No Touring version of this model is available.

Is this cage approved for competition use?

The cage is intended for track and competition use. No homologation number is stated for this E39 item, so check for yourself what the regulations of your organiser require.

What is the delivery time?

The standard delivery time for this roll cage is 15 to 35 working days.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.