AST Weld-in Roll Cage BMW E30 Sedan AWD V1

€773,05 Incl. VAT

AST Weld-in Roll Cage BMW E30 Sedan AWD V1

This full roll cage is built specifically for the all-wheel-drive BMW E30 saloon, the 325iX, whose floor and transmission tunnel differ from those of a standard E30. V1 is the entry level: a main hoop with backstays, permanently welded to the bodyshell at eight points. Unpainted weld-in kit in E355 steel, FIA homologation number 5348 for the 325iX. Delivery time 15 to 35 working days.

Available on back-order|Estimated delivery time: 15 tot 35 werkdagen

Choose where the roll cage is anchored at the rear.

SKU: CMBN05556 Category: Brand:

Description

AST Weld-in Roll Cage BMW E30 Sedan AWD V1

The AST Weld-in Roll Cage BMW E30 Sedan AWD V1 is a full roll cage for the BMW E30 with 4-door saloon bodywork, and specifically for the all-wheel-drive E30, the 325iX. This Weld-in E30 Sedan AWD V1 consists of a main hoop with backstays and is the entry level of the weld-in range.

The cage is designed and built by AST Roll Cages in Spain, with its own floor and tunnel mounting, because the front-axle drive and transfer case give the 325iX a different floor pan from the rear-wheel-drive E30.

Key benefits

  • Specific to the 325iX the foot plates and welded mounting points take account of the drivetrain and tunnel of the all-wheel-drive E30.
  • FIA homologation 5348 AST states homologation number 5348 for this structure, valid for the BMW 325iX.
  • Eight welded mounting points permanently anchored in the bodyshell, without the play of bolted joints.
  • E355 structural steel main hoop with a diameter of 45 mm, rest of the structure with a diameter of 40 mm.
  • Exact fit the cage is custom-designed in 3D following a laser scan of the bodyshell.
  • Lightweight entry level the V1 adds the least mass, which matters on an already heavier 325iX.
  • Complete weld-in kit gussets, reinforcement plates and mounting hardware included.
  • Choice of rear anchorage: when ordering, you specify whether the cage is anchored in the rear suspension area or at the wheel arch.

Suitable for

BMW 3 Series (E30), 4-door saloon, all-wheel drive (325iX)

  • BMW 3 Series (E30) 4-door saloon with all-wheel drive, the 325iX
  • Not suitable for the rear-wheel-drive E30, which has its own RWD version
  • Type: weld-in roll cage, version V1
  • Drifting, track use and rallying

Technical specifications

  • Manufacturer: AST Roll Cages
  • Manufacturer part number: CMBN05556
  • Sunroof: for roofs without a sunroof
  • Headlining: for roofs without headlining
  • Type: full roll cage, weld-in (permanent)
  • Main hoop: E355 steel, 45 mm diameter
  • Secondary structure: E355 steel, 40 mm diameter
  • Foot plates: 3 mm steel, custom-designed for each car
  • Mounting: 8 welded mounting points on the bodyshell
  • Weight: 71 kg (manufacturer’s figure)
  • Finish: unpainted weld-in kit
  • Homologation: FIA homologation number 5348, stated by AST for the BMW 325iX
  • Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set

Fitting and delivery

The cage is built to order; the standard delivery time is 15 to 35 working days. Before welding, check the passages for the front-axle drive and the transfer case, as that is precisely where the 325iX differs from a regular E30. Fitting is permanent and should be carried out by an experienced welder.

This is the AWD version: a main hoop with backstays that fits the floor of the all-wheel-drive E30 325iX.

Why choose this Weld-in E30 Sedan AWD V1 roll cage?

Trying to fit a cage for the regular E30 into a 325iX costs more time and welding than the price difference makes up for, and you sacrifice fit in the process. AST digitises the bodyshell of the 325iX with laser scanners and designs the cage in 3D, so that the reinforcement plates actually match the floor sections of this version.

Frequently asked questions

Is this cage really only for the all-wheel-drive E30?

Yes. The Weld-in E30 Sedan AWD V1 is designed for the all-wheel-drive E30, the 325iX. If you drive a rear-wheel-drive E30 saloon, order the RWD version; the floor and tunnel are shaped differently on that car.

What is included in the delivery?

You receive an unpainted weld-in kit: the tubes, gussets, 3 mm steel reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and a sticker set. Paint and welding are not included. Always check the regulations of your competition organiser yourself.

Where is the roll cage anchored at the rear?

That is up to you. When ordering, you specify whether the cage is anchored in the rear suspension area or at the wheel arch, and AST builds the cage around that choice.

What is the delivery time?

The standard delivery time for this roll cage is 15 to 35 working days.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight71 kg
Car make

BMW

Model

E30

Reviews

There are no reviews yet.

Be the first to review “AST Weld-in Roll Cage BMW E30 Sedan AWD V1”
EN

Your Shopping cart

Close