AST Weld-in Roll Cage BMW G82 Coupé V4 NASCAR door

€1.334,85 Incl. VAT

AST Weld-in Roll Cage BMW G82 Coupé V4 NASCAR door

The same full roll cage as the V4 for the BMW 4 Series G82 Coupé, but with NASCAR door bars: several curved tubes in the door instead of the standard door bar. This gives more side protection and more room to get in. Unpainted weld-in kit in E355 steel, welded to the bodyshell at eight points. Delivery time 15 to 35 working days.

Available on back-order|Estimated delivery time: 15 tot 35 werkdagen

SKU: CMBN05923 Category: Brand:

Description

AST Weld-in Roll Cage BMW G82 Coupé V4 NASCAR door

The AST Weld-in Roll Cage BMW G82 Coupé V4 NASCAR Door Bars is a full roll cage for the BMW 4 Series G82 with 2-door coupé bodywork. This Weld-in G82 Coupé V4 NASCAR has several curved tubes in the door instead of the standard door bar and is welded to the bodyshell at eight points.

The cage is designed and built by AST Roll Cages in Spain, for drifters and track drivers who want extra side protection without sacrificing room to get in.

Key benefits

  • NASCAR door bars: several curved tubes in the door instead of one straight door bar.
  • More side protection: the curved tubes cover a wider area of the door.
  • Easier entry: the outward curve gives you more room to get into the seat, which is a real help in a coupé.
  • V4 base: main hoop with braces, front reinforcement bars to the bulkhead and an extra diagonal brace and harness bar.
  • Eight welded mounting points: permanently welded to the bodyshell for maximum rigidity.
  • E355 steel: 45 mm main hoop and 40 mm for the rest of the structure.
  • Custom scanned: the G82 bodyshell has been digitised with laser scanners and the cage designed in 3D.

Suitable for

BMW 4 Series G82, 2-door coupé

  • BMW 4 Series G82 Coupé, the current M4 coupé from 2021
  • Type: full roll cage, version V4 with NASCAR door bars, weld-in and permanent
  • Drifting, track use and rallying
  • Please note: AST does not offer a convertible version of this cage for the G82
  • Please note: the F82 is the predecessor and has its own cage, which is not interchangeable with this G82 version

Technical specifications

  • Manufacturer: AST Roll Cages
  • Manufacturer part number: CMBN05923
  • Sunroof: for roofs without a sunroof
  • Headlining: for roofs without headlining
  • Rear anchorage: in the rear suspension area
  • Rear structure layout: V design
  • Type: full roll cage, weld-in (permanent), with NASCAR door bars
  • Main hoop: E355 steel, 45 mm diameter
  • Secondary structure: E355 steel, 40 mm diameter
  • Foot plates: 3 mm steel, custom-designed for each car
  • Mounting: 8 welded mounting points on the bodyshell
  • Weight: 71 kg (manufacturer’s figure)
  • Finish: unpainted weld-in kit
  • Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set

Fitting and delivery

The cage is built to order; the standard delivery time is 15 to 35 working days. The NASCAR tubes run through the door area, so bear in mind that the door card will have to be modified to suit. The G82 is a modern car with a lot of electronics and airbags, so plan the fitting carefully and have it established in advance which trim, wiring and cover panels need to come out. Also, always check the regulations of your own sporting organisation.

Curved NASCAR tubes in the door, more side protection and yet easier entry.

Why choose this Weld-in G82 Coupé V4 NASCAR roll cage?

In a coupé, getting in is often the sticking point as soon as a straight door bar is fitted. The NASCAR version solves this by placing several curved tubes in the door, so you keep more room and get more side protection at the same time. AST digitises the bodyshell with laser scanners and designs the cage in 3D, so that the tubes sit snugly within the door area.

Frequently asked questions

What exactly are NASCAR door bars?

The Weld-in G82 Coupé V4 NASCAR has several curved tubes in the door instead of the standard straight door bar. This provides more side protection and leaves more room to get in and out.

Can this cage be removed later?

No. The cage is welded to the bodyshell at eight points and is permanent. If you want a removable solution, take a look at a bolt-in version.

Does this cage also fit an F82 or an open-top version?

No. This cage is exclusively for the 2-door coupé of the G82. The F82 is the predecessor and has its own cage from AST, which is not interchangeable; AST does not offer a convertible version for the G82.

What is the delivery time?

The standard delivery time for this roll cage is 15 to 35 working days.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight71 kg
Car make

BMW

Model

G82

Reviews

There are no reviews yet.

Be the first to review “AST Weld-in Roll Cage BMW G82 Coupé V4 NASCAR door”
EN

Your Shopping cart

Close