Shop

Description

AST Removable Half Roll Cage Nissan Primera P10 Sedan V1

The AST Removable Half Roll Cage Nissan Primera P10 Sedan V1 is a half roll cage for the rear compartment of the Nissan Primera P10 with four-door sedan body and front-wheel drive. This Half Roll Cage Primera P10 V1 stands on four bolt points and is supplied in sections with sleeve connections, so it can come out again later.

The P10 is a sedan with a lot of body behind the rear axle. A cage that ties the rear structure together makes an immediate difference there. This V1 is the basic version: a main hoop behind the seats with stays running back, tying the rear body together without having to strip the whole interior.

Key benefits

• Removable: the structure is split into sections via sleeve connections and can come out again.
• Entry version: the simplest cage AST designs for the P10.
• Four bolt points: bolted onto four base plates that are welded to the body.
• Choice of headlining: when ordering you tell us whether the cage has to allow for the headlining or whether the roof is bare.
• Anchored at the rear: in the rear suspension area.
• X-shaped rear structure: the rear is built as an X for extra stiffness.
• E355 steel: 45 mm diameter main hoop, 40 mm for the rest of the structure.
• Custom base plates: 3 mm thick steel, designed per car rather than universal.
• Exact fit: the body is digitised with laser scanners before the cage is drawn in 3D.
• Complete kit: supplied unpainted with fixings, documentation, installation manual and sticker set.

Fits

Nissan Primera P10, 4-door Sedan

• Nissan Primera P10 four-door sedan with front-wheel drive (1990 to 1996)
• Version: half roll cage, V1, removable via sleeve connections
• Drift, circuit use and track days

The P10 also exists as a five-door hatchback. This cage is designed for the four-door sedan and does not fit the hatchback.

Technical specifications

• Manufacturer: AST Roll Cages
• Manufacturer part number: CMBN01711
• Sunroof: suitable for a roof without sunroof
• Rear anchoring: in the rear suspension area
• Rear structure shape: X design
• Type: half roll cage, removable via sleeve connections
• Main hoop: E355 steel, 45 mm diameter
• Other structure: E355 steel, 40 mm diameter
• Base plates: 3 mm steel, designed per car
• Mounting: 4 bolt points on welded base plates
• Weight: 71 kg
• Finish: welded and unpainted, in sections via sleeve connections
• Included: welded structure, sleeve connections, reinforcement plates, bolts, washers and nuts, documentation, installation manual and sticker set

Installation and delivery

The cage is built to order; the standard delivery time is 15 to 35 working days. The four base plates are welded to the body, then the cage is bolted onto them. On a P10 of this age, check beforehand that the mounting areas are free of rust: welding onto corroded panels gives a cage that will not do its job in a crash. The rear seat and the rear trim come out. This cage is intended for circuit and competition use; check the regulations of your own motorsport organisation beforehand.

Four bolt points, and via the sleeve connections you take it out again after the season.

Why choose this Half Roll Cage Primera P10 V1?

A clean P10 is rare these days, and not everyone wants a cage welded in that never comes out again. This half cage gives you protection behind your head and a stiffer rear body, while the front seats and dashboard stay untouched. The fact that it comes apart also makes it interesting if you ever want to return the car to its original state. Because AST designs the base plates per car, the structure fits snugly rather than with shims.

Frequently asked questions

What do I have to tell you about the headlining?

When ordering you choose whether the cage has to suit a roof with headlining or a bare roof. That determines how closely the tubes follow the roof, so choose what matches your car.

Does this cage also fit the five-door hatchback?

No. This cage is designed for the four-door sedan. The hatchback has a different rear body structure.

Is welding required?

Yes, for the four base plates. They are welded to the body; the cage itself is then bolted onto those plates and can come out again via the sleeve connections.

Can the rear seat stay in?

No. AST does not design its half roll cages to keep the rear seat. Expect the rear seat to come out.

What is the delivery time?

The standard delivery time for this roll cage is 15 to 35 working days, because AST builds every cage to order.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.