Description
BMW E46 Rear Control Arm Reinforcement, No Welding
This E46 rear control arm reinforcement protects the aluminium rear control arms of your BMW E46 against cracking. Those control arms tend to crack, especially when the car has stiffly set-up suspension. With this steel reinforcement you prevent that damage.
The big advantage: you do not have to weld. The reinforcement is placed inside the control arm. The manufacturer recommends fitting it in advance, so before a crack appears, so that you do not end up with a broken arm in the middle of a drift session or track day.
Contents
Key benefits of this E46 rear control arm reinforcement
- Prevents cracks in the aluminium rear control arms
- Especially useful with stiff suspension
- No welding: the reinforcement is placed inside the control arm
- Made of S355 steel, 3 to 5 mm thick
- Laser-cut for an accurate fit
- Zinc-plated against rust
Suitable for
BMW 3 Series E46
- BMW E46 with aluminium rear control arms
Technical specifications
- Item number: 0055
- Application: reinforcement of the rear control arms
- Material: S355 steel
- Thickness: 3 to 5 mm
- Production: laser-cut
- Finish: zinc-plated
- Fitting: placed inside the control arm, no welding
- Weight: 0.74 kg
Installation and delivery
The E46 rear control arm reinforcement is placed inside the control arm; no welding is involved. That also makes it suitable if you do not want to heat the aluminium arm. The most convenient moment is when the control arms are off anyway, for example when replacing bushes or ball joints.
When fitting, check the condition of the control arms at the same time. If you already see hairline cracks in the aluminium, replacing the arm is the safe choice. Always have the wheel alignment checked after work on the rear axle. Only tighten the control arm bolts fully once the car is back on its wheels, so that the bushes are not put under tension.
You will find more parts for a stronger body and suspension in our chassis and subframe reinforcements category. For the E46 bodywork there is also a reinforcement for the rear subframe.
A few steel plates are a lot cheaper than a cracked control arm halfway through a drift day.
Why choose this E46 rear control arm reinforcement?
The aluminium rear control arms of the E46 are light, but with stiff suspension and heavy use they are a well-known weak spot. With this reinforcement you tackle that preventively, without welding and with zinc-plated steel that lasts a long time. That way you drive with peace of mind, both on the road and on the track. And because there is no welding, the original control arm is otherwise left untouched and you can simply keep using it later.
Frequently asked questions
Do I need to weld to fit the reinforcement?
No. The reinforcement is placed inside the control arm; welding is not necessary.
Why do the rear control arms of the E46 crack?
They are made of aluminium and tend to crack, especially with stiffly set-up suspension.
When do I fit the E46 rear control arm reinforcement?
Preferably in advance, before damage occurs. The manufacturer also advises this.
What material is it made of?
S355 steel, 3 to 5 mm thick. The parts are laser-cut and then zinc-plated, so they do not rust even under the car, in moisture and road salt.
Can I use it to repair a cracked arm?
It is intended to prevent cracks. If the arm is already cracked, replace it and fit the reinforcement in the new arm.
Does this reinforcement also make sense for a road car?
Yes, especially if the car is lowered or has stiffer suspension. That is exactly when the aluminium control arms are loaded more heavily, even in normal road use.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.








Reviews
There are no reviews yet.