Shop

Description

Ford Fiesta JH / JD / ST (01-08) JOM BlueLine coilover kit

With the JOM coilover kit Fiesta Mk6 (part number 741108) your Ford Fiesta JH / JD / ST sits lower and handles more tightly. The front comes down by 30 to 65 mm, the rear by 30 to 65 mm.

On a JOM BlueLine kit you adjust the height with everything fitted. The adjustment range is fixed in the Teilegutachten and the springs stay preloaded across that whole range.

Key benefits of the JOM coilover kit Fiesta Mk6

• Vehicle-specific for the Ford Fiesta JH / JD / ST: not a universal kit but matched to this model.
• Lowering 30 to 65 mm front and 30 to 65 mm rear: within the range of the Teilegutachten.
• Adjustable when fitted: no need to remove the kit to change the height.
• Preloaded springs: the preload is kept across the whole adjustment range.
• Cold-wound springs: finished with EPS powder coating.
• Galvanised dampers: better protected against rust.
• High lateral load capacity: built for strong cornering forces.
• §19.3 Teilegutachten (TÜV): the German certificate comes with the kit.
• GOCA certificate for Belgium: can be requested when ordering, for €9.99 extra.

Suitable for

Ford Fiesta Mk6 (JH / JD) / Fiesta ST

• Model years: 2001-2008
• Engines: 1.25, 1.3, 1.4, 1.6, 1.4 TDCi, 1.6 TDCi, ST 2.0 (2004-2008)
• Not sure about the fitment? Please get in touch with us.

Technical specifications of the JOM coilover kit Fiesta Mk6

• Manufacturer: JOM Car Parts & Car Hifi GmbH (Bochum)
• Series: BlueLine
• Part number: 741108
• EAN: 4048961083263
• Design: threaded front and rear; height adjustable on both axles
• Front lowering: 30 to 65 mm
• Rear lowering: 30 to 65 mm
• Maximum front axle load: 900 kg
• Maximum rear axle load: 815 kg
• Springs: cold-wound, EPS powder-coated
• Dampers: galvanised
• Certification: §19.3 Teilegutachten (TÜV, Germany)
• Net kit weight (JOM figure): 22.82 kg

Fitting and delivery of the JOM coilover kit Fiesta Mk6

The kit fits the original mounting points, in place of the standard springs and dampers. After fitting, set the height you want. Have the wheel alignment done afterwards, as camber and toe change with ride height. In Germany the kit is registered after fitting using the Teilegutachten. For the vehicle inspection in Belgium you can request a GOCA certificate when ordering (+ €9.99). Other countries have their own rules for lowered cars. The delivery time for the JOM coilover kit Fiesta Mk6 is 4 to 7 days, as long as JOM has the kit in stock. If the kit is temporarily unavailable, the delivery time shows ‘Ask for delivery time’; please contact us for the current delivery time.

JOM BlueLine 741108 for the Ford Fiesta JH / JD / ST: height-adjustable with the kit fitted, with a §19.3 Teilegutachten.

Why choose this JOM coilover kit Fiesta Mk6?

With this kit you decide how low your Ford Fiesta JH / JD / ST sits, within the range of the Teilegutachten. JOM from Bochum makes suspension and styling parts for many popular car makes, and the BlueLine series is their height-adjustable coilover kit with a German certificate. See also our other coilover kits and all JOM parts.

Downloads and documentation

• Teilegutachten §19.3 (TÜV parts certificate, German, PDF)
• Installation instructions (German, PDF)

Frequently asked questions

Does the JOM coilover kit Fiesta Mk6 fit my Ford Fiesta JH / JD / ST?

This kit is intended for the Ford Fiesta Mk6 (JH / JD) / Fiesta ST, model years 2001-2008. If in doubt, please get in touch with us.

How much can I lower my Ford Fiesta JH / JD / ST with this kit?

The front comes down by 30 to 65 mm, the rear by 30 to 65 mm. You set the height with the kit fitted.

Is a certificate included?

Yes, this kit comes with a German §19.3 Teilegutachten (TÜV); you will also find it above under downloads. In Germany it is used to register the kit after fitting. Other countries have their own rules; check them before you drive the lowered car on public roads.

Can I request a GOCA certificate?

Yes. Tick the GOCA certificate box when ordering; it costs €9.99 extra. The certificate is intended for the vehicle inspection in Belgium.

Can I use this kit on a car with more power than standard?

Yes. The kit is chosen by model, version and axle load, not by engine power. As long as the axle load stays within the values of the kit, it also suits a car with more power than standard. For registration, check which engines are listed in the Teilegutachten.

What is the delivery time for the JOM coilover kit Fiesta Mk6?

The delivery time for the JOM coilover kit Fiesta Mk6 is 4 to 7 days, as long as JOM has the kit in stock. If JOM temporarily cannot supply the kit, the delivery time shows ‘Ask for delivery time’. In that case, please contact us and we will find out the current delivery time for you.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.