Shop

Description

Peugeot 206 / 206 SW (98-09) JOM BlueLine coilover kit

The JOM coilover kit Peugeot 206, part number 741022, is a vehicle-specific, height-adjustable BlueLine kit from German manufacturer JOM for the Peugeot 206 / 206 SW. The front comes down by 35 to 50 mm; at the rear you set the height on the factory torsion bars.

Within the adjustment range of the Teilegutachten you decide how low the car sits, and the springs stay preloaded across that whole range.

Key benefits of the JOM coilover kit Peugeot 206

• Vehicle-specific for the Peugeot 206 / 206 SW: not a universal kit but matched to this model.
• Lowering 35 to 50 mm front, rear via the torsion bars: within the range of the Teilegutachten.
• Adjustable when fitted: no need to remove the kit to change the height.
• Preloaded springs: the preload is kept across the whole adjustment range.
• Cold-wound springs: finished with EPS powder coating.
• Galvanised dampers: better protected against rust.
• High lateral load capacity: built for strong cornering forces.
• §19.3 Teilegutachten (TÜV): the German certificate comes with the kit.
• GOCA certificate for Belgium: can be requested when ordering, for €9.99 extra.

Suitable for

Peugeot 206 (1998-2009) / 206 SW (2002-2007)

• Model years: 1998-2009
• Not sure about the fitment? Please get in touch with us.

Technical specifications of the JOM coilover kit Peugeot 206

• Manufacturer: JOM Car Parts & Car Hifi GmbH (Bochum)
• Series: BlueLine
• Part number: 741022
• EAN: 4048961048071
• Design: threaded front struts; at the rear only the dampers are replaced and the height is set on the factory torsion bars
• Front lowering: 35 to 50 mm
• Rear lowering: via the factory torsion bars
• Maximum front axle load: 890 kg
• Maximum rear axle load: 780 kg
• Springs: cold-wound, EPS powder-coated
• Dampers: galvanised
• Certification: §19.3 Teilegutachten (TÜV, Germany)
• Net kit weight (JOM figure): 13.93 kg

Fitting and delivery of the JOM coilover kit Peugeot 206

The kit fits the original mounting points. On the axle with torsion bars only the dampers are replaced. After fitting, set the height you want. Have the wheel alignment done afterwards, as camber and toe change with ride height. In Germany the kit is registered after fitting using the Teilegutachten. For the vehicle inspection in Belgium you can request a GOCA certificate when ordering (+ €9.99). Other countries have their own rules for lowered cars. The delivery time for the JOM coilover kit Peugeot 206 is 4 to 7 days, as long as JOM has the kit in stock. If the kit is temporarily unavailable, the delivery time shows ‘Ask for delivery time’; please contact us for the current delivery time.

For the Peugeot 206 / 206 SW, JOM supplies BlueLine coilover kit 741022, with lowering of 35 to 50 mm front, rear via the torsion bars and a §19.3 Teilegutachten.

Why choose this JOM coilover kit Peugeot 206?

You get a kit matched to this model, with a German certificate and a fixed adjustment range. That makes the JOM BlueLine series a logical choice if you want your Peugeot 206 / 206 SW lower without gambling on universal parts. See also our other coilover kits and all JOM parts.

Downloads and documentation

• Teilegutachten §19.3 (TÜV parts certificate, German, PDF)
• Installation instructions (German, PDF)

Frequently asked questions

Does the JOM coilover kit Peugeot 206 fit my Peugeot 206 / 206 SW?

This kit is intended for the Peugeot 206 (1998-2009) / 206 SW (2002-2007), model years 1998-2009. If in doubt, please get in touch with us.

How much can I lower my Peugeot 206 / 206 SW with this kit?

The front comes down by 35 to 50 mm; at the rear you set the height on the factory torsion bars.

Is a certificate included?

Yes, this kit comes with a German §19.3 Teilegutachten (TÜV); you will also find it above under downloads. In Germany it is used to register the kit after fitting. Other countries have their own rules; check them before you drive the lowered car on public roads.

Can I request a GOCA certificate?

Yes. Tick the GOCA certificate box when ordering; it costs €9.99 extra. The certificate is intended for the vehicle inspection in Belgium.

Can I use this kit on a car with more power than standard?

Yes. The kit is chosen by model, version and axle load, not by engine power. As long as the axle load stays within the values of the kit, it also suits a car with more power than standard. For registration, check which engines are listed in the Teilegutachten.

What is the delivery time for the JOM coilover kit Peugeot 206?

The delivery time for the JOM coilover kit Peugeot 206 is 4 to 7 days, as long as JOM has the kit in stock. If JOM temporarily cannot supply the kit, the delivery time shows ‘Ask for delivery time’. In that case, please contact us and we will find out the current delivery time for you.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.