Shop

The MTS Civic FK is a height-adjustable coilover kit from MTS Technik for the Honda Civic FK, model years 2012 to 2017. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Gold version, the steel parts have a yellow zinc coating and the aluminium parts are black anodised.

Key benefits

• Zinc-plated damper bodies with a yellow zinc coating to protect against rust
• Lower by 10 to 40 mm, front and rear independently adjustable
• Eibach springs of 50 N/mm front and 22.3 to 31.24 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• 2 year warranty with no mileage limit

Suitable for

The MTS Civic FK fits the following versions:

• Honda Civic FK (type FK, 02/2012 to 07/2017): 1.4 i-VTEC, 1.6 i-DTEC, 1.8 i-VTEC, 2.2 i-DTEC

Note: axle load: maximum 1090 kg front and maximum 895 kg rear; check your car’s vehicle type plate.

Fitting is also possible on cars with electronically adjustable damping; that system must then be disabled.

Technical specifications

• Manufacturer: MTS Technik
• Article number: MTSGWHO10
• EAN: 5903855629097
• Version: Street, Gold (zinc-plated steel)
• Lowering: front 10 to 40 mm, rear 15 to 45 mm
• Springs (Eibach): GWFE205 with 50 N/mm front, GWFE322HA with 22.3 to 31.24 N/mm rear
• Helper springs: GWHE01 (20 N/mm)
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Thread block rear: at the top
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: no
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Civic FK replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Civic FK combines zinc-plated damper bodies, Eibach springs of 50 and 22.3-31.24 N/mm and up to 40 mm of lowering for the Honda Civic FK.

Why choose the MTS Civic FK?

Street is the setup that MTS Technik itself recommends as the standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. The Gold version is the most affordable way to get an MTS Technik coilover kit, with a zinc coating that protects well against rust.

Frequently asked questions

How long does delivery take?

The MTS Civic FK is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the Civic FK

• Honda Civic FK (12-17) MTS Technik coilover kit (front camber plates)