Shop

The MTS Comfort A1 GB Inox is a height-adjustable coilover kit from MTS Technik for the Audi A1 GB, Volkswagen Polo AW, Seat Ibiza KJ and Skoda Scala, from model year 2017. Comfort is the softest MTS Technik setup: lower and firmer than standard, with as much ride comfort as possible.

On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.

Key benefits

• Stainless steel damper bodies, resistant to road salt and moisture
• Lower by 15 to 55 mm, front and rear independently adjustable
• Eibach springs of 20 to 35 N/mm front and 23 to 30 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Comfort A1 GB Inox fits the following versions:

• Audi A1 GB Sportback (type GBA, from 07/2018): 25 TFSI, 30 TFSI, 35 TFSI, 40 TFSI
• Volkswagen Polo AW (type AW1/BZ1/AE1, from 06/2017): 1.0, 1.0 MPi, 1.0 TGI, 1.0 TSI, 1.5 TSI, 1.6 MSi, 1.6 TDI, 2.0 GTI, GTI
• Seat Ibiza KJ (type KJ1/KJG, from 01/2017): 1.0, 1.0 MPi, 1.0 TSI, 1.5 TSI, 1.6 TDI
• Skoda Scala (type NW1, from 02/2019): 1.0 TSI, 1.5 TSI, 1.6 TDI

Note for the MTS Comfort A1 GB Inox: only for cars without electronically controlled damping. Axle load: maximum 1010 kg front and maximum 930 kg rear; check your car’s vehicle type plate.

Technical specifications

• Product: MTS Comfort A1 GB Inox
• Manufacturer: MTS Technik
• Article number: XMTSGWAU54-C
• EAN: 5903855650534
• Version: Comfort, Inox (stainless steel)
• Lowering: front 15 to 55 mm, rear 20 to 50 mm (depending on the model)
• Springs (Eibach): GWFE57VA with 20 to 35 N/mm front, GWFE246HA with 23 to 30 N/mm rear
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Thread block rear: at the top
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: yes
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Comfort A1 GB Inox replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
• After fitting the MTS Comfort A1 GB Inox, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Comfort A1 GB Inox combines stainless steel damper bodies, Eibach springs of 20-35 and 23-30 N/mm and up to 55 mm of lowering for the Audi A1 GB, Volkswagen Polo AW, Seat Ibiza KJ and Skoda Scala.

Why choose the MTS Comfort A1 GB Inox?

With the MTS Comfort A1 GB Inox you choose a lower car without giving up ride comfort; the softer springs make the kit pleasant for long trips and daily use. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.

Frequently asked questions

What is the difference between Comfort, Street and Stance?

All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Comfort (20-35 and 23-30 N/mm), Street (28-40 and 23-30 N/mm) and Stance (30-55 and 40 N/mm). Comfort is the softest. Street is the standard. Stance is the firmest and the lowest.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Comfort A1 GB Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.