Description
The MTS Comfort A4 B5 Inox is a height-adjustable coilover kit from MTS Technik for the Audi A4 B5, model years 1994 to 2002. Comfort is the softest MTS Technik setup: lower and firmer than standard, with as much ride comfort as possible.
On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.
Key benefits
- Stainless steel damper bodies, resistant to road salt and moisture
- Lower by 40 to 90 mm, front and rear independently adjustable
- Eibach springs of 122 N/mm front and 35 N/mm rear
- Gas-oil twin-tube dampers that stay stable even under intensive use
- hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
- TÜV certificate and 2 year warranty with no mileage limit
Suitable for
The MTS Comfort A4 B5 Inox fits the following versions:
- Audi A4 B5 (also Avant, type 8D2/8D5, 11/1994 to 12/2002): 1.6, 1.8, 1.8 T, 1.9 TDI, 2.4, 2.5 TDI, 2.6, 2.8
Note: not suitable for versions with four-wheel drive (quattro). Only for cars without electronically controlled damping. Axle load: 1081 to 1150 kg front and maximum 1185 kg rear; check your car’s vehicle type plate.
Not suitable for the quattro versions.
Technical specifications
- Product: MTS Comfort A4 B5 Inox
- Manufacturer: MTS Technik
- Article number: XMTSGWAU53-C
- EAN: 5903855654969
- Version: Comfort, Inox (stainless steel)
- Lowering: front 40 to 90 mm, rear 45 to 100 mm
- Springs (Eibach): GWFE10VA with 122 N/mm front, GWFE213 with 35 N/mm rear
- Helper springs: GWHE01 (20 N/mm) and GWHE02 (20 N/mm)
- Height adjustment: front and rear via threaded damper body
- Camber plates: not included
- Included: complete front and rear set with springs and height adjustment
- TÜV certificate: yes
- Weight: 24.9 kg
- Warranty: 2 years with no mileage limit
Fitting and delivery
The MTS Comfort A4 B5 Inox replaces the original dampers and springs and fits on the original mounting points.
- The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
- When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
- After lowering, have the wheel alignment checked, because camber and toe change as well.
Delivery: 4 to 7 working days while manufacturer stock lasts.
The MTS Comfort A4 B5 Inox combines stainless steel damper bodies, Eibach springs of 122 and 35 N/mm and up to 90 mm of lowering for the Audi A4 B5.
Why choose the MTS Comfort A4 B5 Inox?
With the MTS Comfort A4 B5 Inox you choose a lower car without giving up ride comfort; the softer springs make the kit pleasant for long trips and daily use. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up.
Frequently asked questions
Does this kit also fit a four-wheel-drive (quattro) version?
No. The MTS Comfort A4 B5 Inox is not suitable for the four-wheel-drive versions. MTS Technik has separate sets for that.
What is the difference between Comfort, Street and Stance?
All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Comfort (122 and 35 N/mm), Street (150 and 35 N/mm) and Stance (200 and 50 N/mm). Comfort is the softest. Street is the standard. Stance is the firmest and the lowest.
How long does delivery take?
The MTS Comfort A4 B5 Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.
Other MTS Technik sets for the A4 B5
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.
EN
NL
FR
DE
Reviews
There are no reviews yet.