Shop

The MTS MX-5 NA is a height-adjustable coilover kit from MTS Technik for the Mazda MX-5 NA, model years 1989 to 1998. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Gold version, the steel parts have a yellow zinc coating and the aluminium parts are black anodised.

Key benefits

• Zinc-plated damper bodies with a yellow zinc coating to protect against rust
• Lower by 35 to 65 mm, front and rear independently adjustable
• Eibach springs of 60 N/mm front and 70 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS MX-5 NA fits the following versions:

• Mazda MX-5 NA (09/1989 to 04/1998): 1.6, 1.6 (NA6C), 1.6 Turbo, 1.8 (NA8C)

Note: axle load: maximum 655 kg front and maximum 665 kg rear; check your car’s vehicle type plate.

Technical specifications

• Manufacturer: MTS Technik
• Article number: MTSGWMA01
• EAN: 5903855609549
• Version: Street, Gold (zinc-plated steel)
• Lowering: front 35 to 65 mm, rear 35 to 65 mm
• Springs (Eibach): GWFE86 with 60 N/mm front, GWFE87 with 70 N/mm rear
• Helper springs: GWHE01 (20 N/mm)
• Height adjustment: front and rear via threaded damper body
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: yes
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS MX-5 NA replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS MX-5 NA combines zinc-plated damper bodies, Eibach springs of 60 and 70 N/mm and up to 65 mm of lowering for the Mazda MX-5 NA.

Why choose the MTS MX-5 NA?

Street is the setup that MTS Technik itself recommends as the standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. The Gold version is the most affordable way to get an MTS Technik coilover kit, with a zinc coating that protects well against rust.

Frequently asked questions

How long does delivery take?

The MTS MX-5 NA is delivered within 4 to 7 working days as long as the manufacturer has stock.