Shop

The MTS Stance Cinquecento Gold is a height-adjustable coilover kit from MTS Technik for the Fiat Cinquecento / Seicento, model years 1991 to 2010. Stance is the lowest and firmest setup from MTS Technik, for those who want the wheel tight under the wheel arch.

On the Gold version, the steel parts have a yellow zinc coating and the aluminium parts are black anodised.

Key benefits

• Zinc-plated damper bodies with a yellow zinc coating to protect against rust
• Lower by 40 to 100 mm, front and rear independently adjustable
• Eibach springs of 70 N/mm front and 25 to 70 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Stance Cinquecento Gold fits the following versions:

• Fiat Cinquecento (type 170, 07/1991 to 07/1999): 0.7, 0.7 i, 0.9, 0.9 i.e, 0.9 i.e. S, 1.1 Sporting
• Fiat Seicento (type 187, 11/1997 to 01/2010): 0.9, 1.1

Note for the MTS Stance Cinquecento Gold: axle load: maximum 610 kg front and maximum 630 kg rear; check your car’s vehicle type plate.

Technical specifications

• Product: MTS Stance Cinquecento Gold
• Manufacturer: MTS Technik
• Article number: MTSGWFI08-S
• EAN: 5903855602144
• Version: Stance, Gold (zinc-plated steel)
• Lowering: front 40 to 100 mm, rear 50 to 100 mm
• Springs (Eibach): GWFE93 with 70 N/mm front, GWFE22HA with 25 to 70 N/mm rear
• Helper springs: GWHE01 (20 N/mm)
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: yes
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Stance Cinquecento Gold replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
• After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Stance Cinquecento Gold combines zinc-plated damper bodies, Eibach springs of 70 and 25-70 N/mm and up to 100 mm of lowering for the Fiat Cinquecento / Seicento.

Why choose the MTS Stance Cinquecento Gold?

With the MTS Stance Cinquecento Gold you choose the lowest possible car with direct, firm handling; the stiffer springs keep the body steady, even with a large lowering. The Gold version is the most affordable way to get an MTS Technik coilover kit, with a zinc coating that protects well against rust. If you also drive in winter, take a look at the Inox version with stainless steel damper bodies.

Frequently asked questions

What is the difference between Street and Stance?

All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Street (60 and 25-70 N/mm) and Stance (70 and 25-70 N/mm). Street is the standard. Stance is the firmest and the lowest.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Stance Cinquecento Gold is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the Cinquecento

• Fiat Cinquecento / Seicento (91-10) MTS Technik coilover kit (front camber plates)