Shop

The MTS Stance E36 Compact Inox is a height-adjustable coilover kit from MTS Technik for the BMW E36 Compact, model years 1994 to 2000. Stance is the lowest and firmest setup from MTS Technik, for those who want the wheel tight under the wheel arch.

On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.

Key benefits

• Stainless steel damper bodies, resistant to road salt and moisture
• Lower by 20 to 90 mm, front and rear independently adjustable
• Eibach springs of 80 N/mm front and 240 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Stance E36 Compact Inox fits the following versions:

• 3 Series E36 Compact (01/1994 to 08/2000): 316g, 316i, 318tds, 318ti, 323ti

Note for the MTS Stance E36 Compact Inox: axle load: maximum 920 kg front and maximum 1040 kg rear; check your car’s vehicle type plate.

Also suitable for versions with M-Technik (M package).

Technical specifications

• Product: MTS Stance E36 Compact Inox
• Manufacturer: MTS Technik
• Article number: XMTSGWBM02-S
• EAN: 5903855624504
• Version: Stance, Inox (stainless steel)
• Lowering: front 20 to 90 mm, rear 10 to 50 mm
• Springs (Eibach): GWFE81 with 80 N/mm front, GWFE111 with 240 N/mm rear
• Helper springs: GWHE01 (20 N/mm) and GWHE02 (20 N/mm)
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: yes
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Stance E36 Compact Inox replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
• For models up to 11/91 and the M3, the shortened drop link MTSLS08 must be ordered separately.
• After fitting the MTS Stance E36 Compact Inox, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Stance E36 Compact Inox combines stainless steel damper bodies, Eibach springs of 80 and 240 N/mm and up to 90 mm of lowering for the BMW E36 Compact.

Why choose the MTS Stance E36 Compact Inox?

With the MTS Stance E36 Compact Inox you choose the lowest possible car with direct, firm handling; the stiffer springs keep the body steady, even with a large lowering. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.

Frequently asked questions

What is the difference between Comfort, Street and Stance?

All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Comfort (24-47.5 and 46-90.1 N/mm), Street (60 and 46-90.1 N/mm) and Stance (80 and 240 N/mm). Comfort is the softest. Street is the standard. Stance is the firmest and the lowest.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Stance E36 Compact Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the E36 Compact

• BMW E36 (90-99) MTS Technik coilover kit
• BMW E36 (90-99) MTS Technik coilover kit (front and rear camber plates)
• BMW E36 Compact (94-00) MTS Technik coilover kit (front and rear camber plates)
• BMW E36 (90-99) MTS Technik coilover kit (front camber plates)
• BMW E36 Compact (94-00) MTS Technik coilover kit (front camber plates)
• BMW Z3 (95-03) MTS Technik coilover kit