Description
The MTS Stance Polo 6N Inox is a height-adjustable coilover kit from MTS Technik for the Volkswagen Polo 6N and Seat Ibiza 6K / Cordoba 6K, model years 1993 to 2009. Stance is the lowest and firmest setup from MTS Technik, for those who want the wheel tight under the wheel arch.
On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.
Key benefits of the MTS Stance Polo 6N Inox
- Stainless steel damper bodies, resistant to road salt and moisture
- Lower by 20 to 90 mm, front and rear independently adjustable
- Eibach springs of 60 N/mm front
- Gas-oil twin-tube dampers that stay stable even under intensive use
- hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
- TÜV certificate and 2 year warranty with no mileage limit
Suitable for
The MTS Stance Polo 6N Inox fits the following versions:
- Volkswagen Polo 6N (also Classic and Variant, type 6N1/6V2/6V5, 10/1994 to 11/2009): 100 1.4 16V, 120 1.6 16V GTI, 1.7 SDI, 45 1.0, 50 1.0, 55 1.3, 55 1.4, 60 1.4, 60 1.7 SDI, 64 1.9 D, 64 1.9 SDI, 75 1.6, 100 1.6, 110 1.9 TDI, 1.9 SDI, 1.9 TDI, 54 1.4, 57 1.7 SDI, 64 1.9 D, 68 1.9 SDI, 75 1.4 16V, 90 1.8, 90 1.9 TDI, 1.4, 1.4 16V, 1.6, 1.8
- Seat Ibiza 6K (type 6K1, 03/1993 to 07/1999): 1.0, 1.0 i, 1.3 i, 1.4, 1.4 i, 1.4 i 16V, 1.6 i, 1.8 i, 1.8 i 16V, 1.9 D, 1.9 SDI, 1.9 TD, 1.9 TDI, 2.0 i, 2.0 i 16V
- Seat Cordoba 6K (also Vario, type 6K1/6K2/6K5, 02/1993 to 07/1999): 1.0 i, 1.4, 1.4 i, 1.4 i 16V, 1.6 i, 1.8 i, 1.8 i 16V, 1.9 D, 1.9 SDI, 1.9 TD, 1.9 TDI, 2.0 i, 2.0 i 16V
Note for the MTS Stance Polo 6N Inox: axle load: maximum 900 kg front and maximum 810 kg rear; check your car’s vehicle type plate.
Technical specifications
- Product: MTS Stance Polo 6N Inox
- Manufacturer: MTS Technik
- Article number: XMTSGWVW27-S
- EAN: 5903855651807
- Version: Stance, Inox (stainless steel)
- Lowering: front 20 to 90 mm, rear 20 to 80 mm
- Springs (Eibach): GWFE97 with 60 N/mm front
- Helper springs: GWHE02 (20 N/mm)
- Height adjustment: front and rear via threaded damper body
- Camber plates: not included
- Included: complete front and rear set with springs and height adjustment
- TÜV certificate: yes
- Weight: 24.9 kg
- Warranty: 2 years with no mileage limit
Fitting and delivery
The MTS Stance Polo 6N Inox replaces the original dampers and springs and fits on the original mounting points.
- The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
- When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
- After fitting the MTS Stance Polo 6N Inox, have the wheel alignment checked, because camber and toe change as well.
Delivery: 4 to 7 working days while manufacturer stock lasts.
The MTS Stance Polo 6N Inox combines stainless steel damper bodies, Eibach springs of 60 N/mm and up to 90 mm of lowering for the Volkswagen Polo 6N and Seat Ibiza 6K / Cordoba 6K.
Why choose the MTS Stance Polo 6N Inox?
With the MTS Stance Polo 6N Inox you choose the lowest possible car with direct, firm handling; the stiffer springs keep the body steady, even with a large lowering. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.
Frequently asked questions
What is the difference between Comfort, Street and Stance?
All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Comfort (40 and 30 N/mm), Street (50 N/mm) and Stance (60 N/mm). Comfort is the softest. Street is the standard. Stance is the firmest and the lowest.
What is the difference between Gold and Inox?
Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.
How long does delivery take?
The MTS Stance Polo 6N Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.
Other MTS Technik sets for the Polo 6N
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.
EN
NL
FR
DE
Reviews
There are no reviews yet.