Shop

The MTS Stance Polo 6N2 Gold is a height-adjustable coilover kit from MTS Technik for the Volkswagen Polo 6N2 and Seat Ibiza 6K / Cordoba 6K, model years 1999 to 2002. Stance is the lowest and firmest setup from MTS Technik, for those who want the wheel tight under the wheel arch.

On the Gold version, the steel parts have a yellow zinc coating and the aluminium parts are black anodised.

Key benefits

• Zinc-plated damper bodies with a yellow zinc coating to protect against rust
• Lower by 15 to 60 mm, front and rear independently adjustable
• Eibach springs of 60 N/mm front
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Stance Polo 6N2 Gold fits the following versions:

• Volkswagen Polo 6N2 (type 6N2, 10/1999 to 10/2001): 1.0, 1.4, 1.4 16V, 1.4 TDI, 1.6 16V GTI, 1.7 SDI, 1.9 D, 1.9 SDI
• Seat Ibiza 6K (type 6K1, 08/1999 to 05/2002): 1.0 16V, 1.0 i, 1.4 16V, 1.4 i, 1.4 i 16V, 1.6 i, 1.8 T 20V Cupra, 1.9 SDI, 1.9 TDI
• Seat Cordoba 6K (also Vario, type 6K1/6K2/6K5, 08/1999 to 12/2002): 1.0, 1.0 i, 1.4, 1.4 16V, 1.4 i, 1.4 i 16V, 1.6 i, 1.8 i, 1.8 T 20V Cupra, 1.9 D, 1.9 SDI, 1.9 TD, 1.9 TDI, 2.0 i, 2.0 i 16V

Note for the MTS Stance Polo 6N2 Gold: axle load: maximum 900 kg front and maximum 860 kg rear; check your car’s vehicle type plate.

Technical specifications

• Product: MTS Stance Polo 6N2 Gold
• Manufacturer: MTS Technik
• Article number: MTSGWVW28-S
• EAN: 5903855602298
• Version: Stance, Gold (zinc-plated steel)
• Lowering: front 15 to 60 mm, rear 20 to 85 mm
• Springs (Eibach): GWFE97 with 60 N/mm front
• Helper springs: GWHE02 (20 N/mm)
• Height adjustment: front and rear via threaded damper body
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: yes
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Stance Polo 6N2 Gold replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Stance Polo 6N2 Gold combines zinc-plated damper bodies, Eibach springs of 60 N/mm and up to 60 mm of lowering for the Volkswagen Polo 6N2 and Seat Ibiza 6K / Cordoba 6K.

Why choose the MTS Stance Polo 6N2 Gold?

With the MTS Stance Polo 6N2 Gold you choose the lowest possible car with direct, firm handling; the stiffer springs keep the body steady, even with a large lowering. The Gold version is the most affordable way to get an MTS Technik coilover kit, with a zinc coating that protects well against rust. If you also drive in winter, take a look at the Inox version with stainless steel damper bodies.

Frequently asked questions

What is the difference between Street and Stance?

All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Street (32 and 40 N/mm) and Stance (60 N/mm). Street is the standard. Stance is the firmest and the lowest.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Stance Polo 6N2 Gold is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the Polo 6N2

• Volkswagen Polo 6N, Seat Ibiza 6K (93-09) MTS Technik coilover kit
• Volkswagen Polo 6N, Seat Ibiza 6K (93-09) MTS Technik coilover kit (front camber plates)