Shop

The MTS Street A2 8Z Inox is a height-adjustable coilover kit from MTS Technik for the Audi A2 8Z, model years 2000 to 2005. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.

Key benefits

• Stainless steel damper bodies, resistant to road salt and moisture
• Lower by 45 to 85 mm, front and rear independently adjustable
• Eibach springs of 32 N/mm front and 40 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• 2 year warranty with no mileage limit

Suitable for

The MTS Street A2 8Z Inox fits the following versions:

• Audi A2 8Z (type 8Z0, 02/2000 to 08/2005): 1.2 TDI, 1.4, 1.4 TDi, 1.6 FSI

Note: axle load: maximum 900 kg front and maximum 860 kg rear; check your car’s vehicle type plate.

Technical specifications

• Product: MTS Street A2 8Z Inox
• Manufacturer: MTS Technik
• Article number: XMTSGWAU68
• EAN: 5903855655072
• Version: Street, Inox (stainless steel)
• Lowering: front 45 to 85 mm, rear 25 to 95 mm
• Springs (Eibach): GWFE22VA with 32 N/mm front, GWFE187 with 40 N/mm rear
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: no
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street A2 8Z Inox replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
• After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street A2 8Z Inox combines stainless steel damper bodies, Eibach springs of 32 and 40 N/mm and up to 85 mm of lowering for the Audi A2 8Z.

Why choose the MTS Street A2 8Z Inox?

Street is the setup that MTS Technik itself recommends as the standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.

Frequently asked questions

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street A2 8Z Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.