Description
The MTS Street A4 B6 Gold is a height-adjustable coilover kit from MTS Technik for the Audi A4 B6/B7, model years 2000 to 2009. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.
On the Gold version, the steel parts have a yellow zinc coating and the aluminium parts are black anodised.
Key benefits
- Zinc-plated damper bodies with a yellow zinc coating to protect against rust
- Lower by 35 to 65 mm, front and rear independently adjustable
- Eibach springs of 102 N/mm front and 66 N/mm rear
- Gas-oil twin-tube dampers that stay stable even under intensive use
- hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
- TÜV certificate and 2 year warranty with no mileage limit
Suitable for
The MTS Street A4 B6 Gold fits the following versions:
- Audi A4 B6 (type 8E2, 11/2000 to 12/2005): 1.6, 1.8 T, 1.9 TDI, 2.0, 2.0 FSI, 2.4, 2.5 TDI, 3.0
- Audi A4 B7 (type 8EC, 11/2004 to 01/2009): 1.6, 1.8 T, 1.9 TDI, 2.0, 2.0 TDI, 2.0 TDI 16V, 2.0 TFSI, 2.5 TDI, 2.7 TDI, 3.0, 3.2 FSI
Note for the MTS Street A4 B6 Gold: only for cars without level control (NIVO) or factory air suspension. Axle load: maximum 1080 kg front and maximum 1150 kg rear; check your car’s vehicle type plate.
Technical specifications
- Product: MTS Street A4 B6 Gold
- Manufacturer: MTS Technik
- Article number: MTSGWAU01
- EAN: 5903357779238
- Version: Street, Gold (zinc-plated steel)
- Lowering: front 35 to 65 mm, rear 35 to 65 mm
- Springs (Eibach): GWFE09VA with 102 N/mm front, GWFE16HA with 66 N/mm rear
- Helper springs: GWHE02 (20 N/mm)
- Height adjustment: front via threaded damper body, rear via separate adjuster element
- Camber plates: not included
- Included: complete front and rear set with springs and height adjustment
- TÜV certificate: yes
- Weight: 24.9 kg
- Warranty: 2 years with no mileage limit
Fitting and delivery
The MTS Street A4 B6 Gold replaces the original dampers and springs and fits on the original mounting points.
- The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
- When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
- Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
- After lowering, have the wheel alignment checked, because camber and toe change as well.
Delivery: 4 to 7 working days while manufacturer stock lasts.
The MTS Street A4 B6 Gold combines zinc-plated damper bodies, Eibach springs of 102 and 66 N/mm and up to 65 mm of lowering for the Audi A4 B6/B7.
Why choose the MTS Street A4 B6 Gold?
With the MTS Street A4 B6 Gold you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. The Gold version is the most affordable way to get an MTS Technik coilover kit, with a zinc coating that protects well against rust. If you also drive in winter, take a look at the Inox version with stainless steel damper bodies.
Frequently asked questions
What is the difference between Gold and Inox?
Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.
How long does delivery take?
The MTS Street A4 B6 Gold is delivered within 4 to 7 working days as long as the manufacturer has stock.
Other MTS Technik sets for the A4 B6
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.
EN
NL
FR
DE
Reviews
There are no reviews yet.