Shop

The MTS Street Alfa Romeo 147 Inox is a height-adjustable coilover kit from MTS Technik for the Alfa Romeo 147 / 156 / GT, model years 1997 to 2010. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.

Key benefits

• Stainless steel damper bodies, resistant to road salt and moisture
• Lower by 15 to 75 mm, front and rear independently adjustable
• Eibach springs of 70 N/mm front and 20 to 44 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Street Alfa Romeo 147 Inox fits the following versions:

• Alfa Romeo 147 (type 937, 10/2000 to 12/2010): 1.6 16V T.SPARK, 1.6 16V T.SPARK ECO, 1.9 JTD 16V, 1.9 JTD, 1.9 JTDM 16V, 1.9 JTDM 8V, 2.0 16V T.SPARK, 2.0, 3.2 GTA
• Alfa Romeo 156 (also Sportwagon, type 932, 02/1997 to 05/2006): 1.6 16V T.SPARK, 1.8 16V T.SPARK, 1.9 JTD 16V, 1.9 JTD, 2.0 16V T.SPARK, 2.0 JTS, 2.4 JTD, 2.5 V6 24V, 3.2 GTA, 1.9 JTD 16V Q4
• Alfa Romeo GT (type 937, 11/2003 to 09/2010): 1.8 TS, 1.9 JTD, 2.0 JTS, 3.2 GTA

Note for the MTS Street Alfa Romeo 147 Inox: only for cars without level control (NIVO) or factory air suspension. Axle load: maximum 1060 kg front and maximum 990 kg rear; check your car’s vehicle type plate.

Technical specifications

• Product: MTS Street Alfa Romeo 147 Inox
• Manufacturer: MTS Technik
• Article number: XMTSGWAL02
• EAN: 5903855629639
• Version: Street, Inox (stainless steel)
• Lowering: front 15 to 75 mm, rear 30 to 85 mm
• Springs (Eibach): GWFE84 with 70 N/mm front, GWFE28HA with 20 to 44 N/mm rear
• Helper springs: GWHE01 (20 N/mm)
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: yes
• Weight: 29.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street Alfa Romeo 147 Inox replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• After fitting the MTS Street Alfa Romeo 147 Inox, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street Alfa Romeo 147 Inox combines stainless steel damper bodies, Eibach springs of 70 and 20-44 N/mm and up to 75 mm of lowering for the Alfa Romeo 147 / 156 / GT.

Why choose the MTS Street Alfa Romeo 147 Inox?

With the MTS Street Alfa Romeo 147 Inox you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.

Frequently asked questions

What is the difference between Street and Stance?

All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Street (70 and 20-44 N/mm) and Stance (90 and 20-44 N/mm). Street is the standard. Stance is the firmest and the lowest.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street Alfa Romeo 147 Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.