Description
The MTS Street Caddy 1 Inox is a height-adjustable coilover kit from MTS Technik for the Volkswagen Caddy 1, model years 1979 to 2008. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use.
On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.
Key benefits
- Stainless steel damper bodies, resistant to road salt and moisture
- Lower by 35 to 80 mm, front and rear independently adjustable
- Eibach springs of 50 N/mm front
- Gas-oil twin-tube dampers that stay stable even under intensive use
- hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
- Front camber plates included, so you can adjust the camber
- 2 year warranty with no mileage limit
Suitable for
The MTS Street Caddy 1 Inox fits the following versions:
- Volkswagen Caddy 1 (type 14, 08/1979 to 11/2008): 1.5, 1.6, 1.6 D, 1.8
Note: not suitable for versions with four-wheel drive (4Motion). Axle load: maximum 785 kg front and maximum 960 kg rear; check your car’s vehicle type plate.
Technical specifications
- Product: MTS Street Caddy 1 Inox
- Manufacturer: MTS Technik
- Article number: XMTSGWVW84
- EAN: 5903855651388
- Version: Street, Inox (stainless steel)
- Lowering: front 35 to 80 mm, rear 50 to 120 mm
- Springs (Eibach): GWFE205 with 50 N/mm front
- Helper springs: GWHE02 (20 N/mm)
- Camber plates: included at the front
- Included: complete front and rear set with springs and height adjustment, plus front camber plates
- TÜV certificate: no
- Weight: 29.9 kg
- Warranty: 2 years with no mileage limit
Fitting and delivery
The MTS Street Caddy 1 Inox replaces the original dampers and springs and fits on the original mounting points.
- The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
- When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
- Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
- The rear height adjustment must be fitted exactly as described in the manual.
- After lowering, have the wheel alignment checked, because camber and toe change as well.
Delivery: 4 to 7 working days while manufacturer stock lasts.
The MTS Street Caddy 1 Inox combines stainless steel damper bodies, Eibach springs of 50 N/mm and up to 80 mm of lowering for the Volkswagen Caddy 1.
Why choose the MTS Street Caddy 1 Inox?
Street is the setup that MTS Technik itself recommends as the standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative. With the included camber plates you set the camber, which with a large lowering means less tyre wear and more grip.
Frequently asked questions
Does this kit also fit a four-wheel-drive (4Motion) version?
No. The MTS Street Caddy 1 Inox is not suitable for the four-wheel-drive versions.
What is the difference between Gold and Inox?
Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.
How long does delivery take?
The MTS Street Caddy 1 Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.
Other MTS Technik sets for the Caddy 1
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.
EN
NL
FR
DE
Reviews
There are no reviews yet.