Description
The MTS Street Chrysler 300C Inox is a height-adjustable coilover kit from MTS Technik for the Chrysler 300C and Dodge Magnum, from model year 2004. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.
On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.
Key benefits
- Stainless steel damper bodies, resistant to road salt and moisture
- Lower by 0 to 45 mm, front and rear independently adjustable
- Eibach springs of 84 N/mm front and 85 to 95 N/mm rear
- Gas-oil twin-tube dampers that stay stable even under intensive use
- hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
- 2 year warranty with no mileage limit
Suitable for
The MTS Street Chrysler 300C Inox fits the following versions:
- Chrysler 300C (also Touring, type LX/LE, from 09/2004): 2.7, 3.0 CRD, 3.0 V6 CRD, 3.5, 5.7, 6.1 SRT8
- Dodge Magnum Estate (type LX, 09/2004 to 12/2008): 2.7, 3.5, 5.7 R/T
Note: not suitable for versions with four-wheel drive (4×4). Only for cars without level control (NIVO) or factory air suspension. Axle load: maximum 1275 kg front and maximum 1275 kg rear; check your car’s vehicle type plate.
Technical specifications
- Product: MTS Street Chrysler 300C Inox
- Manufacturer: MTS Technik
- Article number: XMTSGWCH01
- EAN: 5903855629820
- Version: Street, Inox (stainless steel)
- Lowering: front 0 to 45 mm, rear 15 to 60 mm
- Springs (Eibach): GWFE255VA with 84 N/mm front, GWFE62HA with 85 to 95 N/mm rear
- Helper springs: GWHE01 (20 N/mm)
- Height adjustment: front via threaded damper body, rear via separate adjuster element
- Thread block rear: at the top
- Camber plates: not included
- Included: complete front and rear set with springs and height adjustment
- TÜV certificate: no
- Weight: 29.9 kg
- Warranty: 2 years with no mileage limit
Fitting and delivery
The MTS Street Chrysler 300C Inox replaces the original dampers and springs and fits on the original mounting points.
- The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
- When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
- After lowering, have the wheel alignment checked, because camber and toe change as well.
Delivery: 4 to 7 working days while manufacturer stock lasts.
The MTS Street Chrysler 300C Inox combines stainless steel damper bodies, Eibach springs of 84 and 85-95 N/mm and up to 45 mm of lowering for the Chrysler 300C and Dodge Magnum.
Why choose the MTS Street Chrysler 300C Inox?
Street is the setup that MTS Technik itself recommends as the standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.
Frequently asked questions
Does this kit also fit a four-wheel-drive (4×4) version?
No. The MTS Street Chrysler 300C Inox is not suitable for the four-wheel-drive versions.
What is the difference between Gold and Inox?
Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.
How long does delivery take?
The MTS Street Chrysler 300C Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.
Other MTS Technik sets for the Chrysler 300C
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.
EN
NL
FR
DE
Reviews
There are no reviews yet.