Shop

The MTS Street Civic ED Inox is a height-adjustable coilover kit from MTS Technik for the Honda Civic ED / CRX ED/EE, model years 1987 to 1993. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.

Key benefits

• Stainless steel damper bodies, resistant to road salt and moisture
• Lower by 25 to 70 mm, front and rear independently adjustable
• Eibach springs of 60 N/mm front
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Street Civic ED Inox fits the following versions:

• Honda Civic ED Hatchback and Sedan (type EC/ED/EE, 09/1987 to 10/1993): 1.3 16V Cat, 1.3, 1.4 L, 1.5, 1.5 i 16V, 1.6 i 16V, 1.6 i 16V Vtec, 1.6
• Honda CRX ED/EE (type ED/EE, 10/1987 to 02/1992): 1.4 GL, 1.6 i 16V, 1.6 i 16V Vtec, 1.6 Si

Note for the MTS Street Civic ED Inox: axle load: maximum 850 kg front and maximum 1165 kg rear; check your car’s vehicle type plate.

Technical specifications

• Product: MTS Street Civic ED Inox
• Manufacturer: MTS Technik
• Article number: XMTSGWHO04
• EAN: 5903855655119
• Version: Street, Inox (stainless steel)
• Lowering: front 25 to 70 mm, rear 20 to 65 mm
• Springs (Eibach): GWFE96 with 60 N/mm front
• Helper springs: GWHE01 (20 N/mm) and GWHE24 (5.66 N/mm)
• Height adjustment: front and rear via threaded damper body
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: yes
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street Civic ED Inox replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street Civic ED Inox combines stainless steel damper bodies, Eibach springs of 60 N/mm and up to 70 mm of lowering for the Honda Civic ED / CRX ED/EE.

Why choose the MTS Street Civic ED Inox?

With the MTS Street Civic ED Inox you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.

Frequently asked questions

What is the difference between Comfort, Street and Stance?

All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Comfort (50 N/mm), Street (60 N/mm) and Stance (70 N/mm). Comfort is the softest. Street is the standard. Stance is the firmest and the lowest.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street Civic ED Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.