Shop

The MTS Street E32 Gold is a height-adjustable send-in kit (coilover) from MTS Technik for the BMW E32, model years 1985 to 1994. Street is the standard setup from MTS Technik: a good balance between comfort and firmness.

On the Gold version, the steel parts have a yellow zinc coating and the aluminium parts are black anodised. This is a send-in kit: MTS Technik builds the kit with your own original front struts, so you don’t have to weld anything yourself.

Key benefits

• Zinc-plated damper bodies with a yellow zinc coating to protect against rust
• Lower by 30 to 120 mm, front and rear independently adjustable
• Eibach springs of 84 N/mm front and 80 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• Front camber plates included, so you can adjust the camber
• TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Street E32 Gold fits the following versions:

• 7 Series E32 Sedan (03/1985 to 10/1994): 730i, iL, 730i, iL V8, 735i, iL, 740i, iL V8, 750i, iL V12

Note: only for cars without electronically controlled damping. Axle load: maximum 1110 kg front and maximum 1280 kg rear; check your car’s vehicle type plate.

Fitting is also possible on cars with EDC; extra original BMW parts that are not included in the kit may then be required.

Technical specifications

• Product: MTS Street E32 Gold
• Manufacturer: MTS Technik
• Article number: MTSGWBM86
• EAN: 5903855611375
• Version: Street, Gold (zinc-plated steel)
• Type of kit: send-in kit, made using your own original front struts
• Lowering: front 30 to 120 mm, rear 30 to 80 mm
• Springs (Eibach): GWFE255VA with 84 N/mm front, GWFE81 with 80 N/mm rear
• Helper springs: GWHE02 (20 N/mm)
• Height adjustment: front and rear via threaded damper body
• Front ride height: adjustable independently via the lower damper mounts
• Damper body for: diameter 55 mm
• Camber plates: included at the front
• Included: complete front and rear set with springs and height adjustment, plus front camber plates
• TÜV certificate: yes
• Weight: 36.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

MTS Technik builds the MTS Street E32 Gold with your own original front struts: after receipt they are stripped of their paint, welded to size and zinc-plated.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Cars with NIVO require additional original parts for the rear axle: 2x upper mounting (33521132088) and 4x MTS ring 303202060.
• After fitting the MTS Street E32 Gold, have the wheel alignment checked, because camber and toe change as well.

How a send-in kit works

• After your order we will email you the shipping instructions and the address for your original front struts.
• Beforehand, remove all parts from the struts, such as hubs, bearings, cover caps, damper cartridges, bolts and nuts. If the struts arrive not disassembled, or if damage is found (for example broken bolts), they will be sent back or extra costs will be charged.
• Send in the struts in their original paint, even if it looks bad. Do not spray or paint them beforehand; they are stripped, welded and then zinc-plated.
• Because the kit is made to measure with your struts, the right of withdrawal for distance purchases does not apply: a send-in kit cannot be returned.
• This kit is only delivered within the European Union.

The delivery time depends on when your struts arrive. After your order we will keep you updated by email about the dispatch and the expected delivery time.

The MTS Street E32 Gold combines zinc-plated damper bodies, Eibach springs of 84 and 80 N/mm and up to 120 mm of lowering for the BMW E32.

Why choose the MTS Street E32 Gold?

With the MTS Street E32 Gold you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. The Gold version is the most affordable way to get an MTS Technik coilover kit, with a zinc coating that protects well against rust. If you also drive in winter, take a look at the Inox version with stainless steel damper bodies. With the included camber plates you set the camber, which with a large lowering means less tyre wear and more grip. And because it is a send-in kit, you don’t have to weld anything yourself.

Frequently asked questions

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

Can I return a send-in kit?

No. Because the kit is made to measure with your own struts, the right of withdrawal for distance purchases does not apply.

How long does delivery take?

The delivery time of the MTS Street E32 Gold depends on when your struts arrive. After your order we will keep you updated by email about the dispatch and the expected delivery time.

Other MTS Technik sets for the E32

• BMW E32 (85-94) MTS Technik coilover kit (front camber plates, weld-in insert kit)