Shop

The MTS Street F23 Gold is a height-adjustable coilover kit from MTS Technik for the BMW F23 Cabrio, model years 2014 to 2021. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Gold version, the steel parts have a yellow zinc coating and the aluminium parts are black anodised.

Key benefits

• Zinc-plated damper bodies with a yellow zinc coating to protect against rust
• Lower by 40 to 70 mm, front and rear independently adjustable
• Eibach springs of 30 to 45 N/mm front and 84 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Street F23 Gold fits the following versions:

• 2 Series F23 Cabrio (03/2014 to 06/2021): 218d, 218i, 220d, 220i, 225d, 228i, 230i, M235i, M240i

Note: not suitable for versions with four-wheel drive (xDrive). Only for cars without level control (NIVO) or factory air suspension. Axle load: maximum 1005 kg front and maximum 1230 kg rear; check your car’s vehicle type plate.

Fitting is also possible on cars with electronically adjustable damping; that system must then be disabled.

Technical specifications

• Product: MTS Street F23 Gold
• Manufacturer: MTS Technik
• Article number: MTSGWBM24
• EAN: 5903357784515
• Version: Street, Gold (zinc-plated steel)
• Lowering: front 40 to 70 mm, rear 40 to 70 mm
• Springs (Eibach): GWFE26VA with 30 to 45 N/mm front, GWFE35HA with 84 N/mm rear
• Helper springs: GWHE01 (20 N/mm)
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Thread block rear: at the top
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: yes
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street F23 Gold replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
• After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street F23 Gold combines zinc-plated damper bodies, Eibach springs of 30-45 and 84 N/mm and up to 70 mm of lowering for the BMW F23 Convertible.

Why choose the MTS Street F23 Gold?

Street is the setup that MTS Technik itself recommends as the standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. The Gold version is the most affordable way to get an MTS Technik coilover kit, with a zinc coating that protects well against rust. If you also drive in winter, take a look at the Inox version with stainless steel damper bodies.

Frequently asked questions

Does this kit also fit a four-wheel-drive (xDrive) version?

No. The MTS Street F23 Gold is made for the rear-wheel-drive versions. MTS Technik has separate kits for the xDrive versions.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street F23 Gold is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the F23

• BMW F20/F21/F22/F23/F30/F32 xDrive (11-21) MTS Technik coilover kit