Shop

The MTS Street G21 G22 xDrive Inox is a height-adjustable coilover kit from MTS Technik for the BMW 3-series (G21) and 4-series (G22), from model year 2019. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.

Key benefits

• Stainless steel damper bodies, resistant to road salt and moisture
• Lower by 40 to 60 mm, front and rear independently adjustable
• Eibach springs of 30 to 45 N/mm front and 140 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• Front camber plates included, so you can adjust the camber
• TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Street G21 G22 xDrive Inox fits the following versions:

• 3 Series G21 Touring (from 07/2019): 320d Mild-Hybrid xDrive, 320d xDrive, 330i xDrive
• 4 Series G22 Coupe (from 07/2020): 420d Mild-Hybrid xDrive, 420i xDrive, 430i xDrive

Note for the MTS Street G21 G22 xDrive Inox: axle load: maximum 1090 kg front and maximum 1455 kg rear; check your car’s vehicle type plate.

Fitting is also possible on cars with electronically adjustable damping; that system must then be disabled.

Technical specifications

• Product: MTS Street G21 G22 xDrive Inox
• Manufacturer: MTS Technik
• Article number: XMTSGWBM137
• EAN: 5903855656895
• Version: Street, Inox (stainless steel)
• Lowering: front 40 to 60 mm, rear 40 to 60 mm
• Springs (Eibach): GWFE26VA with 30 to 45 N/mm front, GWFE321 with 140 N/mm rear
• Helper springs: GWHE01 (20 N/mm)
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Thread block rear: at the top
• Camber plates: included at the front
• Included: complete front and rear set with springs and height adjustment, plus front camber plates
• TÜV certificate: yes
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street G21 G22 xDrive Inox replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
• After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street G21 G22 xDrive Inox combines stainless steel damper bodies, Eibach springs of 30-45 and 140 N/mm and up to 60 mm of lowering for the BMW 3 Series (G21) and 4 Series (G22).

Why choose the MTS Street G21 G22 xDrive Inox?

With the MTS Street G21 G22 xDrive Inox you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative. With the included camber plates you set the camber, which with a large lowering means less tyre wear and more grip.

Frequently asked questions

Does this kit also fit a rear-wheel-drive version?

No. The MTS Street G21 G22 xDrive Inox is made for the xDrive (four-wheel-drive) versions. MTS Technik has separate kits for rear-wheel drive.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street G21 G22 xDrive Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the G21/G22 xDrive

• BMW G20/G22/G42 (18-) MTS Technik coilover kit (front axle up to 1030 kg)
• BMW G20/G22/G42 (18-) MTS Technik coilover kit (front axle 1031 to 1170 kg)
• BMW G21/G23/G26 (19-) MTS Technik coilover kit
• BMW G20/G21/G23/G26 (18-) MTS Technik coilover kit
• BMW G20/G22/G42 (18-) MTS Technik coilover kit (front camber plates, front axle up to 1030 kg)
• BMW G20/G22/G42 (18-) MTS Technik coilover kit (front camber plates, front axle 1031 to 1170 kg)