Volkswagen Passat B8 / Touran 5T, Skoda Superb 3 (14-) MTS Technik Street coilover kit Inox (multilink rear axle)

€536,36 Incl. VAT

The MTS Street Passat B8 Inox is a height-adjustable coilover kit with stainless steel damper bodies for the Volkswagen Passat B8 / Touran 5T and Skoda Superb 3 (not with electronically controlled damping).

  • Lowers 35 to 65 mm at the front and 25 to 75 mm at the rear
  • Eibach springs, TÜV certificate and 2 years warranty with no mileage limit
  • Delivery time 4 to 7 working days while manufacturer stock lasts

Also available in another versionClick a kit to view it.

●Goldzinc-plated steelStreetall-round
MTS Street Passat B8 Gold coilover kit
Lowering F/R (mm)35‑65 / 25‑75
Springs F/R (N/mm)28‑40 / 70
Price€549,00View ›
●Inoxstainless steelStreetall-round
MTS Street Passat B8 Inox coilover kit
Lowering F/R (mm)35‑65 / 25‑75
Springs F/R (N/mm)28‑40 / 70
Price€649,00this kit

Available on back-order|Estimated delivery time: 4 to 7 working days

SKU: XMTSGWVW55 Category: Brand:

Description

The MTS Street Passat B8 Inox is a height-adjustable coilover kit from MTS Technik for the Volkswagen Passat B8 / Touran 5T and Skoda Superb 3, from model year 2014. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.

Key benefits

  • Stainless steel damper bodies, resistant to road salt and moisture
  • Lower by 35 to 65 mm, front and rear independently adjustable
  • Eibach springs of 28 to 40 N/mm front and 70 N/mm rear
  • Gas-oil twin-tube dampers that stay stable even under intensive use
  • hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
  • TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Street Passat B8 Inox fits the following versions:

  • Volkswagen Passat B8 (also Variant, type 3G2/CB2/3G5/CB5, from 08/2014): 1.4 TSI, 1.5 TSI, 1.6 TDI, 1.8 TSI, 2.0 TDI, 2.0 TSI, 1.4 TSI 4motion, 2.0 TDI 4motion, 2.0 TSi 4motion
  • Volkswagen Touran 5T (type 5T1, from 05/2015): 1.0 TSI, 1.2 TSI, 1.4 TSI, 1.5 TSI, 1.6 TDI, 1.8 TSI, 2.0 TDI
  • Skoda Superb 3 (also Estate, type 3V3/3V5, 03/2015 to 06/2024): 1.4 TSI, 1.5 TSI, 1.6 TDI, 1.8 TSI, 2.0 TDI, 2.0 TSI, 1.4 TSI 4×4, 2.0 TDI 4×4, 2.0 TSI 4×4

Note for the MTS Street Passat B8 Inox: only for cars without electronically controlled damping. Only for cars with a multilink rear axle. Axle load: maximum 1100 kg front and maximum 1250 kg rear; check your car’s vehicle type plate.

Technical specifications

  • Product: MTS Street Passat B8 Inox
  • Manufacturer: MTS Technik
  • Article number: XMTSGWVW55
  • EAN: 5903855625341
  • Version: Street, Inox (stainless steel)
  • Lowering: front 35 to 65 mm, rear 25 to 75 mm
  • Springs (Eibach): GWFE14VA with 28 to 40 N/mm front, GWFE84 with 70 N/mm rear
  • Helper springs: GWHE02 (20 N/mm)
  • Height adjustment: front via threaded damper body, rear via separate adjuster element
  • Thread block rear: at the top
  • Rear axle: multilink
  • Camber plates: not included
  • Included: complete front and rear set with springs and height adjustment
  • TÜV certificate: yes
  • Weight: 24.9 kg
  • Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street Passat B8 Inox replaces the original dampers and springs and fits on the original mounting points.

  • The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
  • When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
  • Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
  • After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street Passat B8 Inox combines stainless steel damper bodies, Eibach springs of 28-40 and 70 N/mm and up to 65 mm of lowering for the Volkswagen Passat B8 / Touran 5T and Skoda Superb 3.

Why choose the MTS Street Passat B8 Inox?

With the MTS Street Passat B8 Inox you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.

Frequently asked questions

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street Passat B8 Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the Passat B8

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight25 kg
Car make

Skoda, Volkswagen

Model

Passat, Superb, Touran

Reviews

There are no reviews yet.

Be the first to review “Volkswagen Passat B8 / Touran 5T, Skoda Superb 3 (14-) MTS Technik Street coilover kit Inox (multilink rear axle)”
EN

Your Shopping cart

Close