Shop

Description

BMW E30 lockkit – 5×120 E36 conversion

The Cybul BMW E30 angle kit was developed after the first successful tests with the E36 lock kit / angle kit. The kit was 3D CAD-based and tested on the track. Our engineers were in close contact with the test drivers. Each test session resulted in important suggestions for necessary handling improvements. The product finally available to the public takes the handling of the E30 to a whole new level with a maximum turning angle of more than 70 degrees.

Key benefits:

• Correct steering behaviour – it comes back easily during transitions, does not wobble at full steering angle
• Maximum steering angle of more than 70 degrees
• Changed suspension and steering geometry – reduced steering angle when wheels turned, corrected roll centre, increased camber angle, removed Ackerman angle, corrected trailing angle, improved steering response
• The maximum angle lock is infinitely adjustable. 2 adjustable limiters on each wishbone prevent wheel rubbing against bodywork
• Camber plates allow adjusting the trailing angle
• Camber angle can be adjusted on the wishbone
• Allows conversion to E36 knuckles (bigger brakes, more rims available)

Key features:

• Made of high-quality steel
• All necessary parts for installation are included in the kit
• Motorsport steering rods are used for long life – 3-piece, PTFE-lined with 4130 chromoly housing
• Rubber covers for steering rods offer protection against water and dust
• The housings of the pivot points are welded at the correct angle, ensuring the longevity of the pivot points
• 100% bolt-on solution
• 3D CAD design
• 100% made in the EU

In the package you will find:

• 2 (pair) of control arms
• 2 (pair) rod ends for control arms
• 4 (2 pairs) rubber covers for rod ends
• 2 (pair) pivots
• 2 (pair) 90 ShA polyurethane bushings for wishbones
• 2 (pair) camber plates
• 2 (pair) spherical bearings for camber plates with retaining rings
• 2 (pair) steering rods
• 2 (pair) rod ends for steering rods
• 4 (two pairs) bushings for high angle steering rods for skewering
• 2 (pair) fusion adapters
• 4 (two pairs) chromoly, heat-treated tapered inserts for pivot points
• Set of nuts and bolts
• Printed installation manual

We strongly recommend installation in a specialist workshop. E36 hinge points are not included in the kit.
We can fit this set for you at our MrJuul Cars workshop in Roermond, NL.