BMW E46 Top Mounts Raised by 90MM

€74,37 Incl. VAT

BMW E46 Top Mounts Raised by 90MM

Set of two raised rear shock absorber mounts for the BMW E46, with a 90 mm raise. This way the shock absorber keeps enough travel on a very low car or with shock absorbers from a different model. Housing made of 8 mm S355 steel, zinc-plated sleeve and nuts and wear-resistant 80 Shore A rubber.

Available on back-order|Estimated delivery time: 4 to 7 working days

SKU: 0223-90-e46 Category:

Description

BMW E46 Top Mounts Raised by 90MM

The E46 top mounts raised by 90mm are raised rear shock absorber mounts for the BMW E46, and the highest version we offer for this model. They move the upper mounting point of the shock absorber up by 90 mm. This keeps the shock absorber within its working range, even on a very low E46 or with shock absorbers from a different model. You receive a complete set of two.

If your E46 sits really low, the rear shock absorber quickly hits its stop and the car becomes harsh and unsettled. The E46 top mounts raised by 90mm are made for drifting and motorsport, stance builds and powerful road cars where the 60 mm version does not give enough room.

Key benefits of the E46 top mounts raised by 90mm

  • Shock absorber mounting point for the rear axle raised by 90 mm
  • Keeps the shock absorber within its working range on a very low E46
  • Suitable with shock absorbers from a different model
  • Housing and mounting frame made of 8 mm thick S355 steel
  • Zinc-plated sleeve and nuts
  • Rubber of 80 Shore A, more resistant to heat and wear than polyurethane
  • Complete set of 2, for both sides

Suitable for

BMW 3 Series E46

  • BMW E46 3 Series

There is a separate version for the E30, E36, Z3 and Z4. If 90 mm is more than you need, there is also a 60 mm set for the E46.

Technical specifications

  • Item number: 0223-90-e46
  • Type: raised rear shock absorber mount
  • Raise: 90 mm
  • Housing and mounting frame: S355 steel, 8 mm thick
  • Sleeve and nuts: zinc-plated
  • Rubber: 80 Shore A
  • Finish: black and zinc-plated
  • Contents: 2 pieces
  • Weight: 1.50 kg

Installation and delivery

The E46 top mounts raised by 90mm replace the original upper mounts of the rear shock absorbers. Put the car safely on axle stands, support the rear suspension and undo the shock absorbers. Then fit the new mounts to the shock absorbers, reassemble everything and tighten the bolts to the specified torques.

A raise of 90 mm is substantial. So after fitting the E46 top mounts raised by 90mm, check at full compression and full extension that the shock absorber moves freely and does not touch anything. Then set the ride height and have the car aligned.

You will find more versions in our top mounts category. If a smaller raise is enough, take a look at the 60 mm raised top mounts for the E46.

For the E46 that barely floats above the tarmac, but still needs to keep its suspension working.

Why choose these E46 top mounts raised by 90mm?

With the E46 top mounts raised by 90mm you get back the maximum room for your shock absorber on a very low E46. Sturdy 8 mm steel, zinc-plated parts and heat-resistant 80 Shore A rubber make the set suitable for intensive use in drifting, on the track and on the road.

Frequently asked questions

What is the difference with the 60 mm version?

The mounting point sits 30 mm higher. Choose 90 mm if the car sits so low that 60 mm does not give back enough travel.

How many pieces are in the set of E46 top mounts raised by 90mm?

Two pieces, one for each side.

Do they fit the E36?

No, this set is for the E46 only. There is a separate version for the E30 and E36.

What are they made of?

The housing and frame are made of 8 mm S355 steel, the sleeve and nuts are zinc-plated and the rubber has a hardness of 80 Shore A.

Does this make the car lower?

No, the top mount itself does not lower the car. It makes sure the shock absorber keeps enough travel when you set the car low with your coilovers.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight1,50 kg
Car make

BMW

Model

E46

Reviews

There are no reviews yet.

Be the first to review “BMW E46 Top Mounts Raised by 90MM”
EN

Your Shopping cart

Close