Description
BMW E92 X-Brace Rear, Extended Strut Brace
The E92 X brace rear is a considerably extended lower strut brace for the rear of the BMW E92. It rigidly ties together the mounting points at the rear of the body, which benefits handling and safety.
Especially in drifting and track work, you want the rear of the car to respond directly and predictably. A stiff X-brace helps with that, and because this brace goes on existing threaded holes, you do not need to drill or weld.
Contents
Key benefits of the E92 X brace rear
- Greatly extended X shape for extra stiffness at the rear
- Better handling and more safety according to the manufacturer
- Bolt-on: mounts on the original threaded holes
- No modification to the body needed
- Main profile: flat oval steel 40 x 20 mm, wall 3 mm
- MIG/MAG-welded in welding jigs by an experienced, certified welder
- Powder-coated black
Suitable for
BMW 3 Series E92
- BMW E92 coupé
Technical specifications
- Item number: 0187
- Type: lower rear strut brace, extended X version
- Main profile: steel flat oval tube 40 x 20 mm
- Wall thickness: 3 mm
- Welding: MIG/MAG in special welding jigs
- Finish: black powder coating
- Mounting: on the original threaded holes
- Weight: 5.65 kg
Installation and delivery
The E92 X brace rear is bolted on at points where the car already has threaded holes from the factory. So there is no need to drill or weld. If you want to keep the original carpet or trim, you have to cut into it at those points so that the brace fits underneath or through it properly.
Tighten all bolts to the correct torque and check them again after the first track day. A brace that is tight at all points works best. Clean the threaded holes beforehand with a tap or wire brush, so that the bolts screw in smoothly and you do not damage the threads in the body.
You will find more reinforcements in our X-brace and sump guard category. If you want to stiffen the rear even further, also take a look at the lower rear strut brace for the E90, E91 and E92.
A stiff rear end makes the car predictable, and predictable is exactly what you want when you throw it sideways into a corner.
Why choose this E92 X brace rear?
This is a greatly extended rear reinforcement for the E92: a large X-frame of 40 x 20 mm flat oval steel with a 3 mm wall, welded in jigs by a certified welder. Because it goes on the existing threaded holes, the body stays intact and the installation can be reversed.
Frequently asked questions
Do I need to drill or weld for the E92 X brace rear?
No. The brace goes on points where there are already threaded holes from the factory.
Can I leave the original carpet in?
Yes, but then you have to cut into the trim at the mounting points. If you drive without carpet, you mount the E92 X brace rear directly on the threaded holes.
Does the brace also fit the E90 and E93?
The manufacturer only lists the E92 as a suitable model. The E90 and E93 are in the same model group at the manufacturer, but the fit on those models has not been confirmed. If in doubt, please contact us.
How heavy is the X-brace?
The E92 X brace rear weighs 5.65 kg. That is the weight of a sturdy, extended X-frame of 3 mm thick flat oval steel.
How is it finished?
Powder-coated black, which goes with any body colour.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.







Reviews
There are no reviews yet.