Adamat Toyota 3S-GE BEAMS swap kit with damped flywheel for BMW DCT GS7D36SG from M3 S65

€1.167,40 Incl. VAT

Adamat Toyota 3S-GE BEAMS swap kit with damped flywheel for BMW DCT GS7D36SG from M3 S65

Swap kit to connect the Toyota 3S-GE BEAMS from the Altezza to the seven-speed DCT from the BMW M3 E90, E92 and E93 with V8 S65. With a 24.5 mm AW7075-T651 adapter plate, an AlZnMg+Ti flywheel (8.6 kg) with starter ring gear and spring-loaded torsional damper, and all mounting bolts. You choose the damper strength when ordering. Lead time 5 to 7 weeks.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Choose the torque your engine will produce plus 70 Nm. If your engine makes 780 Nm, choose 860 Nm. If in doubt, contact us and we will look at it with you.

For example your chassis, engine code, a different engine tilt or anything else Adamat should take into account.

SKU: ADM-261 Category: Brand:

Description

Adamat Toyota 3S-GE BEAMS swap kit with damped flywheel for BMW DCT GS7D36SG from M3 S65

The 3S-GE swap kit DCT S65 from Adamat Performance connects the Toyota 3S-GE BEAMS from the Altezza to the seven-speed DCT GS7D36SG from the BMW M3 E90, E92 and E93 with V8 S65. This lets you pair the high-revving four-cylinder with a dual-clutch gearbox with seven gears.

The kit consists of an 8.6 kg AlZnMg+Ti flywheel with starter ring gear and spring-loaded torsional damper, a 24.5 mm thick AW7075-T651 adapter plate and the bolts for the flywheel, adapter and gearbox. The DCT has its own clutches, so a clutch is not part of this kit.

You choose the strength of the torsional damper when ordering. If you want to tell Adamat something about your project, such as your chassis or a different engine tilt, use the note field.

Key benefits

  • 3S-GE BEAMS with BMW DCT: the Altezza engine on the seven-speed GS7D36SG
  • 8.6 kg flywheel made of AlZnMg+Ti, with the strength of 42CrMo4 steel
  • Torsional damper in the flywheel: the spring-loaded key insert does the job of a dual-mass flywheel
  • Five strengths: 700, 860, 1056, 1156 or 1300 Nm
  • 24.5 mm AW7075-T651 adapter plate, stronger than S355 and C45 steel
  • Complete set of bolts for flywheel, adapter and gearbox
  • Installation manual available from Adamat

Suitable for

PartSuitable for
EngineToyota 3S-GE BEAMS (Altezza)
GearboxBMW DCT GS7D36SG, 7 speeds
Taken fromBMW M3 E90, E92 and E93 with V8 S65
Gearbox OEM number28007843004

If you have a different gearbox or are unsure about the version, enter the details in the note field. We will check with Adamat.

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Article number: ADM-TA3SGEB-DCTS65
  • Engine: Toyota 3S-GE BEAMS (Altezza)
  • Gearbox: BMW DCT GS7D36SG from the M3 S65 (OEM 28007843004)
  • Flywheel: AlZnMg+Ti, 8.6 kg, with starter ring gear and spring-loaded key insert as torsional damper
  • Torsional damper: 700, 860, 1056, 1156 or 1300 Nm (chosen when ordering)
  • Adapter plate: AW7075-T651 aluminium, 24.5 mm thick
  • Included: adapter plate, flywheel with starter ring gear and torsional damper, bolts for flywheel, adapter plate and gearbox

Installation and delivery

When choosing the damper, Adamat calculates with the planned torque plus 70 Nm. So if your engine makes up to 630 Nm, the 700 Nm damper is sufficient. How much the kit can handle depends on the springs and on how well the damper absorbs the engine’s harmonic vibrations.

Adamat has an installation manual for this kit. If the kit is not in stock, it will be made for you. The lead time is 5 to 7 weeks.

Japanese high-revving engine, German DCT: with this kit your 3S-GE BEAMS shifts through seven gears.

Why choose this 3S-GE swap kit DCT S65?

Adamat Performance has more than 15 years of experience in motorsport and tests new solutions in its own test car first. For this kit, the entire combination of engine, adapter, flywheel and gearbox was designed in 3D, as can be seen in the design drawing. So you get parts made for exactly this engine and this gearbox.

Frequently asked questions

Which torsional damper should I choose for my 3S-GE?

Add 70 Nm to the torque your engine will produce and choose the next strength up: 700, 860, 1056, 1156 or 1300 Nm. If in doubt, enter your engine details in the note field or contact us.

Does the 3S-GE swap kit DCT S65 also fit other 3S-GE versions?

The 3S-GE swap kit DCT S65 is made for the 3S-GE BEAMS from the Altezza. If you have a different 3S-GE generation, mention this in the note field. We will check with Adamat whether the kit fits.

Is a clutch included in the kit?

No. The GS7D36SG has its clutches inside the gearbox itself. The kit contains the adapter plate, the flywheel with starter ring gear and torsional damper, and the mounting bolts.

What is the lead time?

Allow for 5 to 7 weeks. If the kit is not in stock, Adamat makes it for you.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight14 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat Toyota 3S-GE BEAMS swap kit with damped flywheel for BMW DCT GS7D36SG from M3 S65”
EN

Your Shopping cart

Close