Adamat BMW M73/N73 V12 conversion kit with twin-disc clutch 1040 Nm for BMW gearboxes

€1.398,37 Incl. VAT

Adamat BMW M73/N73 V12 conversion kit with twin-disc clutch 1040 Nm for BMW gearboxes

Complete set to connect a BMW V12 to a manual BMW gearbox: duralumin adapter plate with two openings for the crankshaft sensors, 8.4 kg flywheel of AlZnMg+Ti with pulse ring and a twin-disc clutch with two 240 mm LUK 8090S discs and a SACHS pressure plate. The set is made for engines up to 1040 Nm. When ordering you choose your gearbox and can leave a note for Adamat. Lead time 5 to 7 weeks.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Adamat makes the adapter and the clutch discs to fit your gearbox. Choose the code of your gearbox.

If you have a GS6 gearbox, enter the letter code on the type plate or sticker, for example HGD, JGL or HGU. Leave this field empty for an S5D, GS5 or S6S gearbox.

For example your chassis, engine code, a different engine tilt or anything else Adamat needs to take into account.

SKU: ADM-199 Category: Brand:

Description

Adamat BMW M73/N73 V12 conversion kit with twin-disc clutch 1040 Nm for BMW gearboxes

With this BMW V12 twin-disc clutch from Adamat Performance you connect an M73 or N73 to a manual BMW gearbox. The complete set consists of an adapter plate, a light flywheel, two 240 mm clutch discs with an intermediate plate, a SACHS pressure plate, a release bearing and the bolts. The clutch is made for engines up to 1040 Nm.

The V12 has crankshaft sensors located at the gearbox. Adamat has therefore machined two openings for these sensors into the adapter plate and fitted a pulse ring on the starter ring gear of the flywheel, so the engine electronics keep their signal.

A V12 delivers a lot of torque from low revs. With two discs the clutch spreads it over a larger friction area, without the diameter becoming larger than 240 mm. When ordering you choose which BMW gearbox you use; Adamat makes the adapter and discs to fit it.

Main advantages

  • Twin-disc clutch up to 1040 Nm with two 240 mm discs
  • Two sensor openings in the adapter plate for the crankshaft sensors of the M73 and N73
  • Pulse ring on the starter ring gear for the crankshaft signal
  • Flywheel of 8.4 kg made of AlZnMg+Ti, fully CNC-machined from an aerospace alloy
  • Replaceable friction surface of GJS600 nodular cast iron, so the flywheel is easy to overhaul
  • LUK 8090S lining with kevlar on both discs
  • Intermediate plate of heat-treated steel between the two discs
  • SACHS pressure plate with release bearing
  • Dynamically balanced as a complete clutch

Suitable for

Engine: BMW V12 M73 and N73, up to 1040 Nm

Gearbox: manual BMW gearboxes, including the xDrive versions

BMW gearboxFrom chassisOriginal engineInput shaft
GS6-53BZ (6-speed, also xDrive GS6X53BZ)E82, E90-E93, E60-E64N5432,5×35-26N
GS6-53DZ, all versions (6-speed, also xDrive GS6X53DZ)E46, E82, E90-E93, E60-E64M57N, M57N2, N47S32,5×35-26N
GS6-37BZ (6-speed, also xDrive GS6X37BZ)E46, E39, E85, E86, E81, E87, E90, E91, E60, E61N52, M5423,13×29,13-22N
GS6-37DZ (6-speed, also xDrive GS6X37DZ)E46, E39, E85, E86, E81, E87, E90, E91, E60, E61M47, M47N, M47N2, N47, N47N223,13×29,13-22N
GS5-39DZ (5-speed)E46, E39M5728×35-10N
S5D-320Z, S5D-310Z, S5D-260Z (5-speed)E30, E36, E34, E39, E38, E46M50, M52, S50, S5223×29-10N

If your gearbox is not listed, choose “Other gearbox” and enter the code in the note field. We will then check with Adamat what is possible.

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Part number: BMVV12-SCCK-STG1
  • Engine: BMW M73 and N73 (V12)
  • Maximum torque: 1040 Nm
  • Adapter plate: duralumin 2017A, with two openings for the crankshaft sensors
  • Flywheel: single-mass, AlZnMg+Ti, fully CNC-machined, 8.4 kg, starter ring gear with pulse ring, replaceable friction surface of GJS600 nodular cast iron
  • Clutch discs: 2x 240 mm with LUK 8090S lining with kevlar
  • Intermediate plate: heat-treated steel
  • Pressure plate: SACHS
  • Included: adapter plate, flywheel, 2 clutch discs, intermediate plate, pressure plate, release bearing, bolts for flywheel, adapter and gearbox

Installation and delivery

The adapter plate goes between the V12 block and the bellhousing of the gearbox. The crankshaft sensors go into the openings of the adapter and read the pulse ring on the flywheel. Flywheel, discs and pressure plate are balanced together, so you mount the clutch as one package.

Choose your gearbox when ordering. If you want to tell Adamat something about your chassis or a different engine tilt, use the note field. Adamat makes the set to order. The lead time is 5 to 7 weeks.

Twelve cylinders behind a manual BMW gearbox: twin-disc clutch up to 1040 Nm, with the crankshaft sensors simply in their place.

Why choose this BMW V12 twin-disc clutch?

A V12 swap is rarely seen, precisely because the connection to a manual gearbox is difficult. Adamat solves this in one set: adapter with sensor openings, flywheel with pulse ring and a twin-disc clutch that can handle the torque of the V12. If you later convert the engine with turbos, Adamat can supply the same set for 1300, 1560 or 2124 Nm, with 100% kevlar discs and, on request, a SACHS Racing pressure plate. Please contact us for this.

Frequently asked questions

Do the crankshaft sensors of my M73 or N73 still work?

Yes. The adapter plate has two openings for the sensors and the flywheel has a pulse ring on the starter ring gear.

How much torque can this BMW V12 twin-disc clutch handle?

This BMW V12 twin-disc clutch is made for a maximum of 1040 Nm. For engines with turbos, Adamat makes heavier versions up to 2124 Nm.

Which gearboxes can I choose?

The S5D 5-speed gearboxes, the GS5-39DZ, the GS6-37BZ and GS6-37DZ and all versions of the GS6-53BZ and GS6-53DZ, also xDrive. If your gearbox is not listed, choose “Other gearbox” and enter the code in the note field.

What is included in the set?

Adapter plate, 8.4 kg flywheel with starter ring gear and pulse ring, two 240 mm clutch discs, an intermediate plate, SACHS pressure plate, release bearing and the bolts for flywheel, adapter and gearbox.

What is the lead time?

Adamat makes the set to order for your gearbox. Allow 5 to 7 weeks.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight18 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat BMW M73/N73 V12 conversion kit with twin-disc clutch 1040 Nm for BMW gearboxes”
EN

Your Shopping cart

Close