Adamat Ford Duratec/Mazda MX-5 twin-disc clutch STAGE1 1040 Nm for BMW GS6/S5D/GS5

€1.048,10 Incl. VAT

Adamat Ford Duratec/Mazda MX-5 twin-disc clutch STAGE1 1040 Nm for BMW GS6/S5D/GS5

Complete swap kit to connect a Ford Duratec or Mazda MX-5 engine (1.8 to 2.5 litre) to a manual BMW gearbox: dural AW-2017A adapter plate, 5.4 kg hybrid flywheel, two stiff 240 mm discs with LUK 8090S Kevlar lining, SACHS pressure plate, release bearing and bolts. STAGE1 goes up to 1040 Nm. When ordering you choose your gearbox, and in the note field you can pass on any additional requests. Lead time 5 to 7 weeks.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Adamat makes the adapter and the clutch discs to fit your gearbox. Choose the code of your gearbox.

If you have a GS6 gearbox, enter the letter code on the type plate or sticker, for example HGD, JGL or HGU. Leave this field empty for an S5D, GS5 or S6S gearbox.

For example your chassis, engine code, a different engine tilt or anything else Adamat needs to take into account.

SKU: ADM-203 Category: Brand:

Description

Adamat Ford Duratec/Mazda MX-5 twin-disc clutch STAGE1 1040 Nm for BMW GS6/S5D/GS5

This Duratec twin-disc clutch from Adamat Performance connects a Ford Duratec or the engine from the Mazda MX-5, in 1.8, 2.0, 2.3 or 2.5 litre displacement, to a manual BMW gearbox. You get a complete swap kit: adapter plate, light flywheel, two clutch discs, SACHS pressure plate, release bearing and all bolts.

The STAGE1 version is made for engines up to 1040 Nm, more than enough for a four-cylinder with turbo or supercharger. If you are building something even heavier, Adamat also supplies the kit with discs with SAULEDA SF-MC2 lining or with sintered discs. Mention this in the note field, and we will agree the version and the extra cost with Adamat.

Adamat uses these clutches both in projects that have to endure heavy use and in street cars. When ordering you choose your BMW gearbox, and Adamat makes the adapter, flywheel and discs to fit it.

Main advantages

  • Complete swap kit: adapter plate, flywheel, two clutch discs, SACHS pressure plate, release bearing and bolts
  • 5.4 kg flywheel made of the aerospace alloy AlZnMg+Ti, CNC-machined, single-mass with ring gear
  • Works as a heat sink: the light alloy quickly dissipates the heat from the replaceable cast iron friction surface
  • Less risk of heat distortion than with a steel flywheel
  • Stiff 240 mm Performance discs with LUK 8090S lining with Kevlar
  • SACHS pressure plate and release bearing
  • Adapter plate made of dural AW-2017A
  • Class 12.9 flywheel bolts and bolts for adapter and gearbox
  • Fully dynamically balanced

Fits

Engine: Ford Duratec and Mazda MX-5, 1.8, 2.0, 2.3 and 2.5 litre

Gearbox: manual BMW gearboxes

BMW gearboxFrom chassisOriginal engineInput shaft
GS6-53BZ and xDrive GS6X53BZ (6-speed)E82, E90-E93, E60-E64N5432,5×35-26N
GS6-53DZ, all versions, and xDrive GS6X53DZ (6-speed)E46, E82, E90-E93, E60-E64M57N, M57N2, N47S32,5×35-26N
GS6-37BZ and xDrive GS6X37BZ (6-speed)E46, E39, E85, E86, E81, E87, E90, E91, E60, E61N52, M5423,13×29,13-22N
GS6-37DZ and xDrive GS6X37DZ (6-speed)E46, E39, E85, E86, E81, E87, E90, E91, E60, E61M47, M47N, M47N2, N47, N47N223,13×29,13-22N
S6S-420G (6-speed)E46 M3S5428×35-10N
GS5-39DZ (5-speed)E46, E39M5728×35-10N
S5D-320Z, S5D-310Z, S5D-260Z (5-speed)E30, E36, E34, E39, E38, E46M50, M52, S50, S5223×29-10N

If your gearbox has xDrive, please mention this in the note field. If your gearbox is not listed, choose “Other gearbox” and enter the code in the note field. We will then check with Adamat what is possible.

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Part number: MXDUR_TCK_BM1
  • Engine: Ford Duratec and Mazda MX-5, 1.8, 2.0, 2.3, 2.5 litre
  • Maximum torque: STAGE1 1040 Nm
  • Flywheel: 5.4 kg, aerospace alloy AlZnMg+Ti, CNC-machined, single-mass with ring gear and replaceable cast iron friction surface
  • Clutch discs: 2x 240 mm, stiff Performance discs with LUK 8090S lining with Kevlar
  • Pressure plate: SACHS standard
  • Release bearing: included
  • Adapter plate: dural AW-2017A
  • Bearing arrangement: depending on the gearbox, a pilot bearing in the flywheel or a centring pin for the bearing in the input shaft
  • Included: adapter plate, flywheel with ring gear, 2 clutch discs, pressure plate, release bearing, class 12.9 flywheel bolts and bolts for adapter and gearbox

Installation and delivery

Which bearing version your flywheel gets depends on your gearbox: a pilot bearing in the flywheel, or a centring pin that sits in the bearing of the input shaft. Adamat arranges this based on the gearbox you choose. If you want heavier discs, or you have a different engine tilt, please put that in the note field.

Adamat makes the kit to order. The lead time is 5 to 7 weeks.

A light four-cylinder, a strong BMW gearbox and a twin-disc clutch up to 1040 Nm: this kit brings them together.

Why choose this Duratec twin-disc clutch?

The heart of the kit is the hybrid flywheel. The AlZnMg+Ti alloy is stronger than the steel grades usually used for flywheels and quickly dissipates the heat from the cast iron friction surface, so the flywheel works as a heat sink. Steel flywheels can distort when overheated. If the friction surface wears over time, you only replace the insert. Adamat tested the difference between a steel and a hybrid flywheel itself and published the results.

Frequently asked questions

Which engines does this Duratec twin-disc clutch fit?

This Duratec twin-disc clutch fits the Ford Duratec and the Mazda MX-5 engines with a displacement of 1.8, 2.0, 2.3 and 2.5 litres.

Which BMW gearbox can I choose?

When ordering you choose your gearbox, from the S5D 5-speed to the GS6-37, GS6-53 and the S6S-420G from the E46 M3. If your gearbox is not listed, choose “Other gearbox” and state the code in the note field.

Can the clutch handle more than 1040 Nm?

The STAGE1 kit is made for a maximum of 1040 Nm. For heavier setups Adamat makes the kit with SAULEDA SF-MC2 discs or sintered discs. Ask about this via the note field.

What is the lead time?

Adamat makes the kit to order for your gearbox. Allow 5 to 7 weeks.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight18 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat Ford Duratec/Mazda MX-5 twin-disc clutch STAGE1 1040 Nm for BMW GS6/S5D/GS5”
EN

Your Shopping cart

Close