Description
Adamat Honda K20/K24 swap kit adapter + flywheel for BMW ZF 8HP45/50/70/75
A Honda K-series engine with an eight-speed automatic from BMW: the K20 swap kit BMW 8HP from Adamat Performance makes it possible. The kit connects a Honda K20 or K24 to the ZF 8HP45, 8HP50, 8HP70 or 8HP75 and consists of a one-piece flywheel, an adapter plate and the mounting bolts.
The flywheel is made of AlZnMg+Ti, a light alloy with the strength of 42CrMo4 steel. It weighs 3.8 kg and comes with a fitted starter ring gear. The adapter plate is 19.5 mm thick and machined from AW7075-T651 aluminium.
You decide how the engine will sit in the car: at the original angle of approximately 15° or vertical. Adamat makes the adapter based on that choice.
Key benefits
- Honda K20 and K24 on the BMW ZF 8HP: flywheel, adapter and bolts in one kit
- Choice of two engine tilts: original position (approx. 15°) or vertical (0°)
- One-piece 3.8 kg flywheel made of AlZnMg+Ti, with the strength of 42CrMo4 steel
- Starter ring gear already fitted on the flywheel
- 19.5 mm AW7075-T651 adapter plate, according to Adamat stronger than S355 and C45 steel (1.0503)
- Bolts for flywheel, adapter and gearbox included
- Fitting instructions as a PDF from Adamat
- Optional anodising for an extra finishing layer
Suitable for
Engine: Honda K20 and K24
Gearbox: BMW ZF 8HP45, 8HP50, 8HP70 and 8HP75
Adamat’s gearbox table for this kit lists:
| ZF 8HP | Gearbox code | From BMW with engine |
|---|---|---|
| 8HP70 | GA8HP70 | N57, N57N |
| 8HP75 | GA8HP75X | N57, N57N |
| 8HP50 / 8HP50Z | GA8HP50Z | B58 |
| 8HP76 | GA8HP76Z | S58 |
| 8HP75Z | GA8HP75Z | B57 |
| 8HP51Z | GA8HP51Z | B48, B46 |
The 8HP45 is in the name of the kit but not in this table. If you have an 8HP45 or are unsure about your gearbox, enter the gearbox code in the note field. We will check with Adamat.
Technical specifications
- Manufacturer: Adamat Performance (Poland)
- Part number: ADM-K2024-8HP4575
- Engine: Honda K20 and K24
- Gearbox: BMW ZF 8HP45, 8HP50, 8HP70 and 8HP75; Adamat’s gearbox table also lists the 8HP51 and 8HP76
- Engine tilt: original position (approx. 15°) or vertical (0°), selectable
- Flywheel: one-piece, AlZnMg+Ti, 3.8 kg, with fitted starter ring gear
- Adapter plate: AW7075-T651 aluminium, 19.5 mm thick
- Included: flywheel, adapter plate and bolts for flywheel, adapter and gearbox
- Manual: fitting instructions as a PDF
Fitting and delivery
The flywheel goes on the crankshaft of the K20 or K24, the adapter plate between the block and the bellhousing of the 8HP. All the bolts for this are in the kit, and Adamat has fitting instructions as a PDF.
When ordering, you choose the engine tilt (original approx. 15° or vertical) and whether the aluminium parts are anodised. In the note field you can, for example, give your chassis or the gearbox code of your 8HP. Adamat makes the kit to order. The lead time is 5 to 7 weeks, with anodising approximately 2 weeks longer.
Honda K-series up front, BMW 8HP behind it: Adamat supplies flywheel, adapter and bolts, with the engine tilt that suits your project.
Why choose this K20 swap kit BMW 8HP?
Putting a K20 or K24 behind a BMW automatic calls for a flywheel and an adapter that are precisely matched to each other. Adamat makes both in-house from light, strong materials and lets you choose between the original engine tilt and a vertical installation. That gives you room to install the engine in the way that works best in your car.
Frequently asked questions
Does the K20 swap kit BMW 8HP also fit a K24?
Yes, the K20 swap kit BMW 8HP is made for both the Honda K20 and the K24.
Which engine tilt should I choose?
Choose “OEM, approx. 15° tilt” if the engine stays at the original angle, or “Vertical (0°)” if you install it upright. Adamat makes the adapter based on your choice.
Which 8HP gearboxes fit?
The name mentions the 8HP45, 8HP50, 8HP70 and 8HP75. Adamat’s gearbox table lists the 8HP50, 8HP51, 8HP70, 8HP75 and 8HP76. If in doubt, enter your gearbox code in the note field.
What else do I choose when ordering?
Whether the aluminium parts are anodised. There is also a note field for your chassis, gearbox code or other requests.
What is the lead time?
Adamat makes the kit to order. Allow 5 to 7 weeks, with anodising approximately 2 weeks extra.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.












Reviews
There are no reviews yet.