Description
Adamat GM LS/LSX/LSA/LQ/LT swap kit with damped flywheel for BMW DCT GS7D36SG
The LS swap kit BMW DCT from Adamat Performance brings together a V8 from the GM LS or LT family and BMW’s seven-speed DCT gearbox GS7D36SG. You will find this gearbox behind the six-cylinder N54, N55 and S55, including in the M2 and M4. Adamat made the kit for the LS1, LS2, LS3, LS6, LS7 and LS9, the LQ4 and LQ9, and the LSA, LT1 and LT4.
The kit contains an adapter plate by Fortal, a 10.2 kg flywheel and all bolts for flywheel, adapter and gearbox. The flywheel has a fitted starter ring gear and a sprung multi-plate insert. This insert works like a dual-mass flywheel: it damps the vibrations of the V8 and can still handle a lot of torque.
Because the crankshaft flange differs per engine, you select your engine when ordering. You also choose how strong the torsional damper must be, from 860 to 1300 Nm.
Key benefits
- GM V8 with BMW DCT: for LS, LQ and LT engines on the GS7D36SG
- Matched to your crankshaft: versions for crankshafts with 6, 8 or 9 bolts
- Torsional damper in four strengths: 860, 1056, 1156 or 1300 Nm
- Dual-mass effect from a sprung multi-plate insert that protects the DCT from engine vibrations
- AlZnMg+Ti flywheel, with the strength of 42CrMo4 steel, 10.2 kg in total including starter ring gear
- AW7075-T651 adapter, an aluminium alloy that is stronger than S355 and C45 steel
- Complete fastener set with bolts for flywheel, adapter and gearbox
Suitable for
Engine: GM LS, LSA, LQ and LT V8
| Engine | Crankshaft flange |
|---|---|
| LS1, LS2, LS3, LS6, LS7, LQ4, LQ9 | 6 bolts |
| LSA, LT1, LT4 | 8 bolts |
| LS9 | 9 bolts |
Gearbox: BMW DCT GS7D36SG
| BMW gearbox | Original engine | From chassis |
|---|---|---|
| GS7D36SG (7-speed DCT) | N54, N55, S55 (six-cylinder) | E92, E93, F80, F80N, F82, F82N, F83, F83N, F87 M2, F87N |
If you have another engine from the LS family, such as an LSX, choose “Other LS or LT engine” and enter the engine and the number of crankshaft bolts in the note field. We will then coordinate it with Adamat.
Technical specifications
- Manufacturer: Adamat Performance (Poland)
- Part number: ADM_LSLTLQ_DCT-N54S5
- Engine: GM LS1, LS2, LS3, LS6, LS7, LS9, LQ4, LQ9, LSA, LT1, LT4
- Gearbox: BMW DCT GS7D36SG (N54, N55, S55)
- Flywheel: AlZnMg+Ti with integrated starter ring gear and sprung multi-plate insert, 10.2 kg in total
- Damper versions: 860 Nm, 1056 Nm, 1156 Nm and 1300 Nm
- Adapter plate: AW7075-T651 aluminium (Fortal)
- Included: adapter plate, flywheel with starter ring gear and damper, bolts for flywheel, adapter and gearbox
Installation and delivery
Adamat has an installation manual for this kit that describes the assembly of adapter, flywheel and DCT. The required bolts are included.
When ordering you make two choices. First your engine, so that the flywheel fits the correct crankshaft flange. Then the torsional damper, following Adamat’s rule: the torque your engine will make plus 70 Nm, and then the version above that. An LS3 with 650 Nm thus comes to 720 Nm and therefore to the 860 Nm version. If in doubt, contact us. In the note field you add extra information, such as your chassis. Adamat makes the kit to order, the lead time is 5 to 7 weeks.
An American V8 with BMW’s fast DCT, connected by a kit that fits your crankshaft and your torque exactly.
Why choose this LS swap kit BMW DCT?
An LS or LT engine delivers a lot of torque and considerable vibrations, and a DCT is not made for that. Adamat’s damped flywheel absorbs those vibrations and still stays light thanks to the AlZnMg+Ti alloy. Adapter, flywheel and bolts are designed to work together, so you join engine and gearbox without any modifications of your own.
Frequently asked questions
Which engine should I choose when ordering?
Choose the group that contains your engine: LS1, LS2, LS3, LS6, LS7, LQ4 and LQ9 (6 crankshaft bolts), LSA, LT1 and LT4 (8 bolts) or the LS9 (9 bolts). If your engine is not listed, choose “Other LS or LT engine” and give the details in the note field.
Which torsional damper do I need?
Add 70 Nm to the torque your engine will make and choose the next version up: 860, 1056, 1156 or 1300 Nm. If in doubt, we will help you choose.
Does the LS swap kit BMW DCT fit the DCT from an M3 V8?
The LS swap kit BMW DCT is made for the GS7D36SG from the six-cylinder N54, N55 and S55, from the E92, E93, F80, F82, F83 and F87 M2. The DCT from the M3 with the S65 V8 is not on Adamat’s list for this kit. If you have such a gearbox, please contact us first.
What is the lead time?
The kit is made to order. Allow 5 to 7 weeks.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.










Reviews
There are no reviews yet.