Description
Adamat GM LS/LSX/LSA/LQ/LT swap kit for Dodge and RAM 1500 ZF 8HP70/8HP90
This LS swap kit Dodge 8HP from Adamat Performance is a complete kit for connecting a GM LS, LSX, LSA, LQ or LT engine to the ZF 8HP70 or 8HP90 from the Dodge Challenger, Charger, Hellcat or the RAM 1500 5.7 HEMI. You get an adapter plate, a billet flywheel, a reducing ring and all mounting bolts.
The one-piece flywheel is made of AlZnMg+Ti, weighs approximately 4.8 kg and is designed for a maximum of 2000 Nm. The ring gear is built into the flywheel. This means you do not need the original flywheel of the GM automatic; according to Adamat, that original flywheel can only handle limited torque and often cracks above 600 Nm.
When ordering, you choose the crankshaft version of your engine (6, 8 or 9 bolts) and whether the aluminium parts are anodised. In the note field you provide, among other things, the year of manufacture of your 8HP gearbox, because the reducing ring for the torque converter shaft depends on it.
Key benefits
- GM V8 with the 8HP from Dodge and RAM: Challenger, Charger, Hellcat and RAM 1500 5.7 HEMI
- Billet flywheel up to 2000 Nm, one-piece, made of AlZnMg+Ti with, according to Adamat, the strength of 42CrMo4 steel
- No original GM flywheel needed, which according to Adamat often cracks above 600 Nm
- Built-in ring gear in the flywheel of approx. 4.8 kg
- Reducing ring for the converter shaft, matched to the year of manufacture of your 8HP
- 24 mm AW7075-T651 adapter plate, according to Adamat stronger than S355 and C45 steel (1.0503)
- Crankshaft with 6, 8 or 9 bolts selectable when ordering
- Mounting bolts for flywheel, adapter and gearbox included
Suitable for
Engine (GM)
| Engines | Crankshaft flange |
|---|---|
| LS1, LS2, LS3, LS6, LS7, LQ4, LQ9 | 6 bolts |
| LSA, LT1, LT4 | 8 bolts |
| LS9 | 9 bolts |
Gearbox: ZF 8HP70 or 8HP90 from the Dodge Challenger, Charger, Hellcat and the RAM 1500 5.7 HEMI
The LSX is in Adamat’s title, but not in the engine list. If you drive an LSX or another variant, choose “Other LS/LT engine” and state the engine in the note field; we will check with Adamat.
Technical specifications
- Manufacturer: Adamat Performance (Poland)
- Item number: ADM-LSLX-8HPDODGE-SF
- Engine: GM LS, LSX, LSA, LQ and LT (see table)
- Gearbox: ZF 8HP70 and 8HP90 from Dodge Challenger, Charger, Hellcat and RAM 1500 5.7 HEMI
- Flywheel: one-piece billet, AlZnMg+Ti, approx. 4.8 kg, with built-in ring gear, maximum 2000 Nm
- Reducing ring: for the torque converter shaft, depending on the year of manufacture of the 8HP
- Adapter plate: AW7075-T651 aluminium, 24 mm thick
- Included: adapter plate, flywheel, reducing ring and mounting bolts for flywheel, adapter and gearbox
- Fitting instructions: available as a PDF from Adamat
Fitting and delivery
The billet flywheel replaces the original flywheel of the GM automatic and has its own ring gear. The reducing ring is intended for the torque converter shaft; which ring you need depends on the year of manufacture of your 8HP. The 24 mm adapter plate connects the block to the gearbox housing. Adamat has fitting instructions as a PDF.
Adamat makes the kit to order. The lead time is 5 to 7 weeks. If you choose anodising, this adds approximately 2 weeks.
An LS or LT engine with the 8HP from a Challenger, Charger or RAM, and a billet flywheel that Adamat designed for 2000 Nm.
Why choose this LS swap kit Dodge 8HP?
Adamat Performance has been making parts for motorsport for more than 15 years. This kit replaces the original GM flywheel with a billet one with ring gear, designed for much more torque. Adapter plate, flywheel and reducing ring come from one manufacturer and are matched to your crankshaft.
Frequently asked questions
Which choices do I make when ordering?
You choose your engine’s crankshaft (6, 8 or 9 bolts, or another LS/LT engine) and whether the aluminium parts are anodised. In the note field you enter the year of manufacture of your 8HP gearbox, your car and other requirements.
Do I need the original GM flywheel?
No. This LS swap kit Dodge 8HP has its own billet flywheel with ring gear, so the original flywheel of the GM automatic is not needed.
Why do I need to provide the year of manufacture of my 8HP?
The kit contains a reducing ring for the torque converter shaft. According to Adamat, which ring is needed depends on the year of manufacture of the 8HP.
What is the lead time?
Adamat makes the kit to order for your engine. Allow 5 to 7 weeks, approximately 2 weeks longer with anodising.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.













Reviews
There are no reviews yet.