Adamat BMW M50/M52/M54/S50/S52/S54 adapter plate for BMW ZF 8HP45/50/70

€250,76 Incl. VAT

Adamat BMW M50/M52/M54/S50/S52/S54 adapter plate for BMW ZF 8HP45/50/70

CNC-machined adapter plate made of 15 mm AW7075-T651 aluminium to connect a BMW M50, M52, M54, S50, S52 or S54 to a ZF 8HP automatic, with bolts for adapter and gearbox. Works with the original N57 flexplate and original bolts, which you order separately. You choose your engine, the engine tilt and optional anodising. Lead time 5 to 7 weeks, approximately 2 weeks extra with anodising.

Available on back-order|Estimated delivery time: 5 to 7 weeks

The M50 from the E34 sits at a different angle, which is why there is a separate version for it.

Choose whether the engine stays in its original position or is set upright or at a steeper tilt.

Optional anodised layer on the aluminium parts. This is done externally and adds approximately 2 weeks to the lead time.

For example your chassis, engine code, the code of your gearbox or anything else Adamat should take into account.

SKU: ADM-219 Category: Brand:

Description

Adamat BMW M50/M52/M54/S50/S52/S54 adapter plate for BMW ZF 8HP45/50/70

With this M54 8HP adapter plate from Adamat Performance you put a classic BMW six-cylinder (M50, M52, M54, S50, S52 or S54) behind a modern ZF 8HP eight-speed automatic. The adapter is CNC-machined from 15 mm AW7075-T651 aluminium and comes with the bolts for the adapter and gearbox.

For the drive you use original BMW parts: the flexplate from the N57 with the matching bolts and the original torque converter bolts. These are not included in the kit; the BMW numbers are listed below so you can easily order them separately.

Adamat makes the adapter to order. When ordering, you choose your engine, because the M50 from the E34 sits at a different angle, and you can have a different engine tilt made: upright (0°) or 20°.

Key benefits

  • Eight gears behind your M50, M52, M54, S50, S52 or S54
  • Adapter plate made of 15 mm AW7075-T651, an aluminium alloy that according to Adamat is stronger than S355 and C45 steel
  • Works with original BMW parts: N57 flexplate and original bolts
  • Fits a range of 8HP gearboxes, from the 8HP45 to the 8HP76
  • Version per engine: separate version for the M50 from the E34 with 27.5° tilt
  • Custom engine tilt: original position, vertical (0°) or 20°
  • Bolts for adapter and gearbox are included in the kit
  • Anodising available as an extra finish

Suitable for

Engine: BMW M50, M52, M54, S50, S52 and S54

Gearbox: BMW ZF 8HP eight-speed automatic

ZF 8HP gearboxCodeOriginal BMW engine
8HP45GA8HP45XB47 (B47C20, B47D20)
8HP50GA8HP50ZB58 (B58B30)
8HP51GA8HP51ZB48 (B48B20), B46 (B46B20)
8HP70GA8HP70N57, N57N
8HP75GA8HP75XN57, N57N
8HP75GA8HP75ZB57 (B57B30)
8HP76GA8HP76ZS58 (S58B30)

If your gearbox is not listed, put the code in the note field or contact us before ordering.

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Article number: ADM-M5X-8HP4575-FP
  • Engine: BMW M50, M52, M54, S50, S52 and S54
  • Gearbox: BMW ZF 8HP45, 8HP50, 8HP51, 8HP70, 8HP75 and 8HP76
  • Adapter plate: AW7075-T651 aluminium, 15 mm thick
  • Included: adapter plate, bolts for adapter and gearbox, fitting instructions (PDF)
  • Not included: original flexplate N57/N57N (BMW 11228506670), 8 flexplate bolts (BMW 11227797966), 6 torque converter bolts (BMW 24407561393)

Fitting and delivery

The original N57 flexplate goes on the crankshaft with the original bolts, the adapter plate on the block, and then the 8HP with its torque converter goes behind it. Order the flexplate and the bolts separately using the BMW numbers above.

When ordering, you choose your engine, the engine tilt and whether you want the adapter anodised. If there is anything else Adamat needs to know, such as your chassis or engine code, put it in the note field. Adamat makes the adapter to order. The lead time is 5 to 7 weeks; anodising adds approximately 2 weeks.

Your trusted BMW six-cylinder with eight gears behind it, on an adapter made of 15 mm aerospace aluminium and with an original BMW flexplate.

Why choose this M54 8HP adapter plate?

The ZF 8HP is fitted in many modern BMWs, so a suitable gearbox is easy to find. With this adapter you combine it with an M50 to S54, without having to make a flywheel yourself: Adamat uses the original N57 flexplate. Because the adapter is made per engine and, if required, with a modified tilt, it matches your swap.

Frequently asked questions

Which engine should I choose when ordering?

If you have an M50 from the E34, choose the version with 27.5° tilt. For the M50, S50, M52, S52, M54 and S54 from all other chassis, choose the second option.

What does custom engine tilt mean?

As standard, the adapter keeps the original position of the engine. You can also choose an engine that stands upright (0°) or at a tilt of 20°, if your swap requires it.

Which parts do I still need besides the M54 8HP adapter plate?

Besides the M54 8HP adapter plate you need the original flexplate of the N57/N57N (BMW 11228506670), 8 flexplate bolts (BMW 11227797966) and 6 bolts for the torque converter (BMW 24407561393).

Can I have the adapter anodised?

Yes, you choose this when ordering. Anodising is done externally and takes approximately 2 extra weeks.

What is the lead time?

Adamat makes the adapter to order. Allow 5 to 7 weeks, or approximately 2 weeks longer with anodising.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight6 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat BMW M50/M52/M54/S50/S52/S54 adapter plate for BMW ZF 8HP45/50/70”
EN

Your Shopping cart

Close