Adamat BMW M60/M62/S62/N62 twin-disc clutch for BMW gearboxes

€1.405,42 Incl. VAT

Adamat BMW M60/M62/S62/N62 twin-disc clutch for BMW gearboxes

Complete swap kit to connect a BMW V8 to a manual BMW gearbox: adapter plate made of duraluminium 2017A with opening for the crankshaft sensor, 8.4 kg CNC flywheel, two 240 mm LUK 8090S discs with Kevlar, intermediate plate, SACHS pressure plate, release bearing and bolts. The standard set goes up to 1040 Nm, heavier versions up to 2124 Nm are available on request. When ordering, you choose your gearbox and you pass on any extra requests in the note field. Lead time 5 to 7 weeks.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Adamat makes the adapter and the clutch discs to fit your gearbox. Choose the code of your gearbox.

If you have a GS6 gearbox, enter the letter code on the type plate or sticker, for example HGD, JGL or HGU. Leave this field empty for an S5D, GS5 or S6S gearbox.

For example your chassis, engine code, a different engine inclination or anything else Adamat needs to take into account.

SKU: ADM-186 Category: Brand:

Description

Adamat BMW M60/M62/S62/N62 twin-disc clutch for BMW gearboxes

This M62 twin-disc clutch from Adamat Performance is a complete swap kit to connect a BMW V8 from the M60, M62, S62 or N62 family to a manual BMW gearbox. Adapter plate, flywheel, two clutch discs, intermediate plate, pressure plate, release bearing and bolts are all included in the set.

The standard version is made for engines up to 1040 Nm. If you fit a turbo or supercharger to your V8 and the torque goes up further, Adamat also builds the set for 1300, 1560 or 2124 Nm. State this in the note field, and we will agree the version and the extra cost with Adamat.

On the M62, S62 and N62, the crankshaft sensor sits in the gearbox from the factory. That is why the adapter plate has an opening for that sensor and the starter ring gear on the flywheel carries a trigger ring.

Main advantages

  • Complete twin-disc swap kit: adapter plate, flywheel, two discs, intermediate plate, SACHS pressure plate, release bearing and all bolts
  • Two 240 mm clutch discs with LUK 8090S lining with Kevlar; the heavier versions get 100% Kevlar, a good alternative to sintered discs
  • Crankshaft sensor in the adapter and a trigger ring on the starter ring gear
  • 8.4 kg flywheel made of the aerospace alloy AlZnMg+Ti, fully CNC-machined
  • Rebuildable flywheel: the friction surface made of GJS600 nodular cast iron is a separate insert that you can replace
  • Intermediate plate made of heat-treated special steel
  • Adapter plate made of duraluminium 2017A
  • Fully dynamically balanced
  • Upgradeable to 1300, 1560 or 2124 Nm and with a reinforced SACHS Racing pressure plate

Suitable for

Engine: BMW M60, M62, S62 and N62 V8

Gearbox: manual BMW gearboxes

BMW gearboxFor example fromNote
S5D-320Z, S5D-310Z, S5D-260Z (ZF 5-speed)E36 328i, E46 328i, E46 330i, E39 528i, E39 530iAdamat recommends a gearbox with MTF oil
GS5-39DZ (5-speed)E46 330d, E39 525d, E39 530d5-speed of the M57 diesel
S6S-420G (Getrag 6-speed)E46 M36-speed of the S54
GS6-37DZ (6-speed)E46 and other modelsChoose the version for M47 or N47 when ordering
GS6-53DZ and other GS6 gearboxes (6-speed)E60, E61, E90 3.0d (M57N, M57N2)Two versions: with centring pin in the bearing or with bearing in the input shaft. Codes include GS6-53DZ, GS6-56BZ, HGU, HGJ, GJD

If your gearbox is not listed, choose “Other gearbox” and put the code in the note field. We will then check with Adamat what is possible.

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Part number: BMV8-SCCS-5057
  • Engine: BMW M60, M62, S62, N62 (V8)
  • Maximum torque: 1040 Nm standard, 1300, 1560 or 2124 Nm on request
  • Flywheel: 8.4 kg, aerospace alloy AlZnMg+Ti, 100% CNC-machined, starter ring gear with trigger ring
  • Flywheel friction surface: replaceable insert made of GJS600 nodular cast iron
  • Clutch discs: 2x 240 mm with LUK 8090S lining with Kevlar
  • Intermediate plate: heat-treated special steel
  • Pressure plate: SACHS, reinforced SACHS Racing at extra cost
  • Release bearing: included
  • Adapter plate: duraluminium 2017A, with opening for the crankshaft sensor
  • Included: adapter plate, flywheel, 2 clutch discs, intermediate plate, pressure plate, release bearing, flywheel bolts and bolts for adapter and gearbox

Installation and delivery

You mount the crankshaft sensor of your V8 directly in the adapter plate. When ordering, you choose your gearbox, so that Adamat matches the adapter and the spline of the discs to it. If you have a GS6 gearbox, state in the note field whether it has a centring pin in the bearing or a bearing in the input shaft, if you know. You can also pass on a higher torque class, a SACHS Racing pressure plate or a different engine inclination there.

Adamat makes the set to order. The lead time is 5 to 7 weeks.

Two discs, an 8.4 kg flywheel and an adapter with room for the crankshaft sensor: everything to connect your BMW V8 to a manual BMW gearbox.

Why choose this M62 twin-disc clutch?

With two discs, the clutch spreads the force over a larger friction area, so it can handle much more torque than a single disc of the same diameter. You notice that with a V8 that pulls hard from low revs. At Adamat, adapter, flywheel and clutch are designed as one unit, so all parts fit together and you can later move up to a heavier version.

Frequently asked questions

How much torque can this M62 twin-disc clutch handle?

The standard M62 twin-disc clutch goes up to 1040 Nm. For stronger turbo engines, Adamat makes versions up to 1300, 1560 and 2124 Nm; ask about this via the note field.

Which gearboxes can I choose?

When ordering, you choose from the S5D-320Z, S5D-310Z or S5D-260Z, the GS5-39DZ, the GS6-53DZ (HGU, HGD, HGK, JGA), the GS6-37DZ for M47 or N47 and the S6S-420G. Another GS6 gearbox, such as the GS6-56BZ, is chosen via “Other gearbox” with the code in the note field.

Does the set also fit the M60?

Yes, the set fits the M60, M62, S62 and N62. The opening for the crankshaft sensor in the adapter is there for the M62, S62 and N62.

What is the lead time?

Adamat builds the set to order for your gearbox. Allow 5 to 7 weeks.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight18 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat BMW M60/M62/S62/N62 twin-disc clutch for BMW gearboxes”
EN

Your Shopping cart

Close