Description
Adamat Toyota 1UZ/3UZ-FE swap kit for Dodge Challenger/Charger/Hellcat ZF 8HP70/8HP90
This UZ swap kit Dodge 8HP from Adamat Performance connects a Toyota 1UZ-FE or 3UZ-FE V8 to the ZF 8HP70 or 8HP90 eight-speed automatic from the Dodge Challenger, Charger and Hellcat. Adamat also lists the 8HP from the Dodge RAM 1500 with the 5.7 HEMI.
The heart of the set is a one-piece flywheel made of AlZnMg+Ti, a light alloy that according to Adamat has the strength of 42CrMo4 steel. The flywheel is designed for a maximum of 2000 Nm and has an integrated starter ring gear. As a result, you no longer need the original flywheel of the Toyota automatic.
The set also includes an adapter plate made of AW7075-T651 aluminium, a reducing ring for the torque converter shaft and the bolts for flywheel, adapter and gearbox.
Key benefits
- Made for the Dodge 8HP: ZF 8HP70 and 8HP90 from Challenger, Charger and Hellcat
- One-piece flywheel up to 2000 Nm made of AlZnMg+Ti, with the strength of 42CrMo4 steel
- Starter ring gear integrated in the flywheel
- No original Toyota flywheel needed: according to Adamat it handles limited torque and often cracks above about 600 Nm
- AW7075-T651 adapter plate, according to Adamat stronger than S355 and C45 steel (1.0503)
- Reducing ring for the torque converter shaft, matched to the year of manufacture of the 8HP
- All mounting bolts for flywheel, adapter and gearbox
- Fitting instructions available as a PDF from Adamat
Suitable for
Engine: Toyota 1UZ-FE and 3UZ-FE V8
| Gearbox | From |
|---|---|
| ZF 8HP70 | Dodge Challenger, Charger, Hellcat |
| ZF 8HP90 | Dodge Challenger, Charger, Hellcat |
| ZF 8HP (according to Adamat) | Dodge RAM 1500 5.7 HEMI |
If you run an 8HP from a BMW, Adamat has separate UZ kits for the BMW version. If you are unsure about your gearbox, put the code and the year of manufacture in the note field.
Technical specifications
- Manufacturer: Adamat Performance (Poland)
- Part number: ADM-UZ-8HP-DODGE
- Engine: Toyota 1UZ-FE and 3UZ-FE
- Gearbox: ZF 8HP70 and 8HP90 (Dodge)
- Flywheel: one-piece, AlZnMg+Ti, designed for a maximum of 2000 Nm, with integrated starter ring gear
- Adapter plate: AW7075-T651 aluminium
- Reducing ring: for the torque converter shaft of the 8HP, depending on the year of manufacture
- Included: flywheel, adapter plate, reducing ring, bolts for flywheel, adapter and gearbox
- Instructions: fitting instructions as a PDF
Fitting and delivery
The Adamat flywheel goes on the crankshaft of the UZ, in place of the original flywheel. The adapter plate connects the V8 block to the 8HP, and the reducing ring takes up the torque converter shaft. Which ring you need depends on the year of manufacture of the gearbox.
When ordering you choose whether the aluminium parts are anodised. In the note field you give the year of manufacture of your 8HP and, if applicable, your engine version, chassis or a different engine tilt. Adamat makes the kit to order. The lead time is 5 to 7 weeks. If you choose anodising, allow about 2 weeks extra.
Toyota V8 up front, Dodge 8HP behind it: flywheel up to 2000 Nm, adapter and reducing ring in one kit from Adamat.
Why choose this UZ swap kit Dodge 8HP?
On a UZ with more horsepower than stock, the original flywheel of the Toyota automatic is often the weak point. Adamat replaces it with a one-piece flywheel designed for up to 2000 Nm, and supplies the adapter and the reducing ring to match exactly. Everything comes from one manufacturer in Poland, so we can check questions about your combination of engine and gearbox directly with Adamat.
Frequently asked questions
Which Toyota engines fit this kit?
The kit is made for the Toyota 1UZ-FE and 3UZ-FE V8.
Does the UZ swap kit Dodge 8HP also fit an 8HP from a BMW?
No, the UZ swap kit Dodge 8HP is made for the Dodge version of the 8HP70 and 8HP90. For the BMW ZF 8HP, Adamat has separate UZ kits.
What do I choose when ordering?
You choose whether the aluminium parts are anodised (externally, about 2 weeks extra). In the note field you state the year of manufacture of your 8HP for the correct reducing ring, and further for example your engine version, chassis or a different engine tilt.
Do I still need the original flywheel?
No. The Adamat flywheel replaces the original flywheel of the Toyota automatic and has its own starter ring gear.
What is the lead time?
Adamat makes the kit to order: allow 5 to 7 weeks. Anodising adds about 2 weeks.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.






Reviews
There are no reviews yet.