Description
Adamat Nissan VK56DE swap kit adapter + flywheel for BMW ZF 8HP45/50/70/75
With this VK56DE swap kit BMW 8HP from Adamat Performance, you mate the Nissan VK56DE V8 to a ZF 8HP automatic from a BMW. The kit works together with the original Nissan flexplate for automatics: Adamat reinforces it with its own flywheel and supplies the adapter plate to mount the 8HP to the block.
The reinforcement flywheel is milled from billet AlZnMg+Ti, a light alloy with a strength comparable to 42CrMo4 steel. It weighs 2.8 kg and is designed for a nominal torque of up to 3000 Nm.
The adapter plate of approximately 29.5 mm is milled from AW7075-T6 Fortal aluminium and has an integrated holder for the crankshaft sensor. The bolts for the flywheel, adapter and gearbox are included in the kit.
Key advantages
- Reinforcement flywheel for the original flexplate, designed for up to 3000 Nm nominal torque
- Billet AlZnMg+Ti with a strength comparable to 42CrMo4 steel
- Flywheel of only 2.8 kg
- Adapter plate of approx. 29.5 mm AW7075-T6 Fortal, according to Adamat comparable in strength to 4140 steel
- Integrated crankshaft sensor holder in the adapter plate
- Fits many BMW 8HP gearboxes with 6-bolt and 4-bolt torque converter
- Complete bolt set for flywheel, adapter and gearbox
Suitable for
Engine: Nissan VK56DE
Gearbox: BMW ZF 8HP automatic (8-speed), torque converter with 6 or 4 bolts, bolt circle approx. 260.8 mm
| ZF 8HP type | Code | Original BMW engine |
|---|---|---|
| 8HP70 | GA8HP70 | N57, N57N |
| 8HP75 | GA8HP75X | N57, N57N |
| 8HP50Z | GA8HP50Z | B58 (B58B30) |
| 8HP75Z / 8HP75 | GA8HP75Z | B57 (B57B30) |
| 8HP51Z / 8HP51 | GA8HP51Z | B48 (B48B20) |
| 8HP51Z / 8HP51 | GA8HP51Z | B46 (B46B20) |
| 8HP45Z | GA8HP45X | B47C20, B47D20 |
| 8HP45Z | GA8HP45X | N47 |
Not included, but required: the original Nissan flexplate 12331-7S00A or 12331-1CA0B. According to Adamat, flexplate 12331-JK20A also works.
Technical specifications
- Manufacturer: Adamat Performance (Poland)
- Item number: ADM-VK56DE-8HP45-75
- Engine: Nissan VK56DE
- Gearbox: BMW ZF 8HP (see table), torque converter with 6 or 4 bolts
- Reinforcement flywheel: billet AlZnMg+Ti, 2.8 kg, designed for up to 3000 Nm nominal torque, for use with the original flexplate
- Adapter plate: AW7075-T6 Fortal aluminium, approx. 29.5 mm thick, with crankshaft sensor holder
- Included: reinforcement flywheel, adapter plate, bolts for flywheel, adapter and gearbox
- Not included: original flexplate (12331-7S00A, 12331-1CA0B or 12331-JK20A)
- Manual: according to Adamat, available soon
Fitting and delivery
The reinforcement flywheel goes on the crankshaft together with the original Nissan flexplate, after which the adapter plate connects the VK56DE to the 8HP. The crankshaft sensor fits in the holder of the adapter plate. An installation manual is being prepared by Adamat.
When ordering, you choose whether the aluminium parts are anodised. Use the note field to let Adamat know which 8HP you have, which chassis the engine is going into or which engine tilt you want. Adamat makes the kit to order; the lead time is 5 to 7 weeks and approximately 2 weeks longer with anodising.
A Nissan VK56DE V8 on a BMW 8HP: reinforcement flywheel up to 3000 Nm and an adapter plate with its own crankshaft sensor holder.
Why choose this VK56DE swap kit BMW 8HP?
You keep the original flexplate and the Adamat flywheel reinforces it, while the flywheel itself weighs only 2.8 kg. The crankshaft sensor has a fixed place in the adapter plate, so you do not have to make your own holder for it. Adamat Performance has more than 15 years of experience in motorsport and makes every kit in Poland; we can put questions about your setup directly to them.
Frequently asked questions
Which flexplate do I need with the VK56DE swap kit BMW 8HP?
The VK56DE swap kit BMW 8HP works with the original Nissan flexplate 12331-7S00A or 12331-1CA0B; according to Adamat, 12331-JK20A also fits. The flexplate is not included in the kit.
How much torque can the flywheel handle?
Adamat designed the reinforcement flywheel for a nominal torque of up to 3000 Nm.
Which 8HP gearboxes fit?
The kit fits the BMW ZF 8HP70, 8HP75, 8HP50Z, 8HP75Z, 8HP51Z and 8HP45Z from the table, with a torque converter with 6 or 4 bolts. If in doubt, enter your gearbox code in the note field.
What do I choose when ordering?
You choose whether the aluminium parts are anodised, which adds approximately 2 weeks to the lead time. In the note field you pass on any additional information to Adamat, such as your chassis or gearbox code.
What is the lead time?
Adamat makes the kit to order: 5 to 7 weeks, with anodising approximately 2 weeks longer.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.












Reviews
There are no reviews yet.