Adamat AN10 fittings oil filter relocation BMW V8 M60/M62/S62/N62

€56,62 Incl. VAT

Adamat AN10 fittings oil filter relocation BMW V8 M60/M62/S62/N62

Set of four AN10 fittings (7/8 inch) to relocate the oil filter housing of a BMW M60, M62, S62 or N62 V8 in a swap: two for the original engine bracket and two for the filter housing. When ordering you choose the small diameter for the M60 or the large diameter for M62, S62 and N62. Also handy for connecting an oil cooler. Lead time 5 to 7 weeks.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Fittings for the oil filter housing

The fittings for the engine bracket are the same for all engines. Choose the diameter that matches your oil filter housing here.

SKU: ADM-117 Category: Brand:

Description

Adamat AN10 fittings oil filter relocation BMW V8 M60/M62/S62/N62

With this set of AN10 oil filter fittings from Adamat Performance you move the oil filter housing of a BMW M60, M62, S62 or N62 V8 to a place that does fit in your swap. You fit the fittings into the original engine bracket and into the oil filter housing, and connect the two with oil pressure hoses.

In a V8 swap the oil filter housing is often in the way of the steering rack, subframe or manifold. With this set you mount the filter where there is room. An oil cooler is also easy to add to the circuit this way.

All fittings have a 7/8 inch thread, i.e. AN10, and work with common AN hose ends. When ordering you choose the fittings that match your oil filter housing: the small diameter of the M60 or the large diameter of the M62, S62 and N62.

Key benefits

  • Oil filter where you want it: the filter housing no longer has to sit in its original place
  • Easy to add an oil cooler: the hoses between engine and filter are a logical place for a cooler
  • AN10 (7/8 inch) thread on all fittings, fitting common AN hose ends
  • Original part stays: the fittings go into the original engine bracket and the original filter housing
  • For four V8 engines: M60, M62, S62 and N62
  • Choice per filter housing: small diameter for the M60, large diameter for M62, S62 and N62
  • Complete for both sides: two fittings for the engine bracket and two for the filter housing

Suitable for

Engine: BMW M60, M62, S62 and N62 V8

Oil filter housingFitting diameter
M60small diameter
M62, S62 and N62large diameter

The fittings for the engine bracket are the same for all four engines.

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Part number: ADM-117
  • Thread: 7/8 inch (AN10)
  • Engine: BMW M60, M62, S62 and N62
  • Contents: 2 AN10 fittings for the original engine bracket and 2 AN10 fittings for the oil filter housing
  • Filter housing fitting: small diameter (M60) or large diameter (M62, S62, N62), to be chosen when ordering
  • Not included: hoses and hose ends

Installation and delivery

You screw the two fittings for the engine bracket into the original bracket on the block, and the other two into the oil filter housing. Then you connect both sides with AN10 oil pressure hoses at the length your swap requires, optionally with an oil cooler in between. The photos show the fittings with right-angle AN hose ends; you choose those hose ends and the hoses yourself.

Adamat makes the set to order. The lead time is 5 to 7 weeks.

The oil filter of your BMW V8 exactly where it suits your swap, with standard AN10 hoses.

Why choose these AN10 oil filter fittings?

A home-made solution for oil filter relocation means tapping threads into original parts and searching for the right sizes. Adamat Performance has been working with BMW V8 swaps for years and made these fittings to match the original engine bracket and the filter housings of the M60 and M62 family exactly. You choose the right diameter, connect your hoses and you are done.

Frequently asked questions

Which filter housing fitting should I choose?

When ordering you choose the version that matches your oil filter housing. If you have a filter housing from an M60, choose the small diameter. For a filter housing from an M62, S62 or N62, choose the large diameter.

Are the hoses included?

No. The set consists of four fittings with AN10 thread. You choose the hoses and hose ends yourself, at the length your swap requires.

Can I also connect an oil cooler with these AN10 oil filter fittings?

Yes, with the AN10 oil filter fittings you can include an oil cooler in the line between the engine bracket and the filter housing.

What is the lead time?

Adamat makes the set to order. Allow 5 to 7 weeks.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight1 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat AN10 fittings oil filter relocation BMW V8 M60/M62/S62/N62”
EN

Your Shopping cart

Close