Description
BMW E36 Caliper Adapter ABS for Hydraulic Handbrake (Weld-in Version)
This E36 caliper adapter lets you fit an extra brake caliper to each wheel of a BMW E36 with rear disc brakes. You connect that second caliper to a hydraulic handbrake, and the ABS sensor simply stays in use. So you do not have to choose between a separate handbrake caliper and working ABS.
The adapters are made for drift and track cars on which the handbrake is used hard. Because they are welded onto the control arm, they form a solid base for the extra caliper, even when you pull the handbrake hard corner after corner.
Contents
Key benefits of this E36 caliper adapter
- Extra brake caliper on each rear wheel for a separate hydraulic handbrake
- The ABS sensor stays in use
- The sensor does not need to be bolted in place: the carrier clamps it lightly
- Set of 2 adapters, left and right
- Made of 8 mm thick S355 steel, laser-cut and sandblasted
- Welded onto the rear control arm for a solid base
Suitable for
BMW 3 Series E36 with rear disc brakes
- BMW E36 with disc brakes on the rear axle and a rear ABS sensor
Technical specifications
- Item number: 0252
- Application: weld-in adapter for a second rear brake caliper, ABS is retained
- Material: S355 steel, sandblasted
- Thickness: 8 mm
- Production: laser-cut
- Mounting: welded onto the control arm, at the original location of the ABS sensor
- Contents: 2 adapters (left and right)
- Weight: 0.54 kg
Installation and delivery
First remove the ABS sensor. Fit the caliper carrier, the caliper and the brake disc, position the E36 caliper adapter and weld it on while everything is in place. That way the extra caliper lines up exactly with the disc. Weld calmly in short beads so that the control arm does not warp from the heat.
After welding, take everything apart again and cut out a seat for the sensor. If necessary, grind the sensor housing down slightly and cut off the tab for the mounting bolt. The sensor is then lightly clamped by the carrier, so no bolt is needed. The fitting photos were taken on an E46: the control arms of the E36 and E46 are virtually identical and the procedure is the same. To operate it, the YDC Classic Premium hydraulic handbrake is a good fit, for example. You will find other solutions in our dual caliper brackets category.
A hydraulic handbrake with its own brake caliper, and still normal ABS on the rear axle.
Why choose this E36 caliper adapter?
If you are building an E36 for drifting, you want a handbrake that locks the wheels directly and powerfully, separate from the normal brake system. This E36 caliper adapter gives you exactly that, without sacrificing the ABS sensor. The 8 mm thick, sandblasted S355 steel and the welded mounting keep the adapter firmly in place, even after many practice days and competitions.
Frequently asked questions
Can I keep my ABS?
Yes. The sensor stays in use and, after fitting, is lightly clamped in place by the caliper carrier.
Why do some photos show an E46?
The example photos were taken on an E46. The control arms of the E36 and E46 are virtually identical, so the installation is the same.
How many adapters do I get?
Two: one for the left and one for the right.
Does the E36 caliper adapter have to be welded?
Yes. It is welded onto the control arm, with the carrier, caliper and disc fitted for the correct alignment.
Can I fit the adapter myself?
Yes, if you have experience welding suspension parts. If you are unsure, leave it to a workshop.
What material is the adapter made of?
8 mm thick S355 steel, laser-cut and sandblasted.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.











Reviews
There are no reviews yet.