BMW E46 Top Mounts Raised by 60MM

€74,37 Incl. VAT

BMW E46 Top Mounts Raised by 60MM

Raised rear top mounts for the BMW E46, supplied as a set of two. The shock absorber mounting point sits 60 mm higher, so the shock absorber keeps enough travel even on a heavily lowered car. Made of 8 mm S355 steel with a zinc-plated sleeve and nuts and 80 Shore A rubber.

Estimated delivery time: 1 to 2 working days

SKU: 0223-60 -e46 Category:

Description

BMW E46 Top Mounts Raised by 60MM

With these E46 top mounts raised by 60mm you move the upper mounting point of the rear shock absorbers of your BMW E46 up by 60 mm. This way the shock absorber keeps enough travel, even when the car is lowered a lot or when you use shock absorbers from a different model. The price is for a complete set of two.

An E46 that sits low on coilovers will quickly bottom out on the shock absorber’s bump stop at the rear. That costs grip and comfort. These raised top mounts are intended for drifting and motorsport, stance builds and powerful road cars that need to sit low without the suspension running out of travel.

Key benefits of the E46 top mounts raised by 60mm

  • 60 mm higher mounting point for the rear shock absorber
  • Prevents the shock absorber from hitting its stop on a heavily lowered E46
  • Handy with shock absorbers from a different model
  • Housing and bracket made of 8 mm S355 steel
  • Zinc-plated sleeve and nuts
  • Rubber of 80 Shore A, with better temperature and wear resistance than polyurethane
  • Set of 2, ready for left and right

Suitable for

BMW 3 Series E46

  • BMW E46 3 Series

If you drive an E30, E36, Z3 or Z4, choose the version for those models. For the E46 there is also a 90 mm version alongside this 60 mm one.

Technical specifications

  • Item number: 0223-60 -e46
  • Type: raised rear shock absorber mount (top mount)
  • Raise: 60 mm
  • Housing and bracket: S355 steel, 8 mm
  • Sleeve and nuts: zinc-plated
  • Rubber hardness: 80 Shore A
  • Finish: black and zinc-plated
  • Supplied as: set of 2
  • Weight: 1.25 kg

Installation and delivery

The E46 top mounts raised by 60mm replace the original upper rear shock absorber mounts. Put the E46 safely on axle stands, support the rear suspension and undo the shock absorbers. Fit the raised top mounts to the shock absorbers and reassemble everything. Tighten everything to the specified torques.

After fitting the E46 top mounts raised by 60mm, check that the shock absorbers do not foul anything or hit their stops at full compression and full extension. Then set the ride height and have the wheel alignment checked.

You will find other top mounts and mountings in our top mounts category. If your E46 needs more height, take a look at the 90 mm raised top mounts for the E46.

Running low and still having enough suspension travel: that is what a well set-up E46 is all about.

Why choose these E46 top mounts raised by 60mm?

A heavily lowered E46 quickly loses suspension travel at the rear. This set moves the shock absorber mounting point up by 60 mm, so the suspension can do what it is meant to do again. The 8 mm thick steel and the wear-resistant 80 Shore A rubber were chosen for intensive use on track and road.

Frequently asked questions

What does a raised top mount do?

It moves the shock absorber mounting point upwards. This gives the shock absorber more room to compress when the car sits low.

How many pieces are in the set?

The E46 top mounts raised by 60mm are supplied as a set of two, one for each side.

Do the E46 top mounts raised by 60mm fit the E36?

No. This set is for the E46; there is a separate version for the E30, E36, Z3 and Z4.

What are they made of?

The housing and bracket are made of 8 mm S355 steel, the sleeve and nuts are zinc-plated and the rubber has a hardness of 80 Shore A.

When should I choose the 90 mm version?

If your E46 sits even lower or you use shock absorbers that need even more room. If you are unsure, please contact us.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight1,25 kg
Car make

BMW

Model

E46

Reviews

There are no reviews yet.

Be the first to review “BMW E46 Top Mounts Raised by 60MM”
EN

Your Shopping cart

Close