Shop

Description

BMW E36 Reinforced Gearbox Mount, Reinforced Steel and Powder Coated

This E36 reinforced gearbox mount is the crossmember that carries the rear of a manual gearbox in the E36. It is made of steel with many pressed relief shapes and extra reinforcements, so it is considerably stiffer than the standard mount. This keeps the gearbox in place, even when the driveline is under heavy load.

The mount is intended for sports cars, regardless of power output. On rally cars it absorbs impacts against the underside; on circuit and drift cars it takes the high torque forces acting on the gearbox and the mount.

Key benefits of this E36 reinforced gearbox mount

• Reinforced steel with many pressed relief shapes
• Extra reinforcements at the heavily loaded points
• Fully CNC-made for an accurate shape
• Black powder coating as a finish
• Resistant to impacts from below in rallying
• Made for high torque on the circuit and in drifting
• Weight approximately 1.34 kg

Suitable for

BMW 3 Series E36 with manual gearbox

• BMW E36 with manual gearbox
• Rally, circuit and drift cars, regardless of power output

Technical specifications

• Item number: 0121
• Type: gearbox mount (crossmember) for manual gearboxes
• Material: steel with pressed relief shapes and extra reinforcements
• Production: fully CNC-made
• Finish: black powder coating
• Weight: 1.34 kg

Installation and delivery

This E36 reinforced gearbox mount replaces the original mount. Put the car safely on a lift or axle stands and support the gearbox with a jack before you undo the old mount. Then fit the reinforced mount and tighten the bolts to the specified torque.

While you are doing this job, also check the gearbox mounting rubbers. Worn or torn rubbers will still let the gearbox move, even with a sturdy mount.

You will find matching rubbers with our reinforced gearbox mounts for BMW. More parts are in the gearbox mounts category.

A strong gearbox mount keeps the gearbox in place, precisely when the driveline is under the heaviest load.

Why choose this reinforced mount?

The standard gearbox mount of the BMW E36 is designed for an ordinary road car. Motorsport adds higher forces and sometimes impacts from below. This mount has more relief and extra reinforcements, is fully CNC-made and powder-coated black. This gives you a part that suits a car that is driven hard.

Frequently asked questions

Does this mount fit an E36 automatic?

No, the manufacturer states that this E36 reinforced gearbox mount is intended for manual gearboxes.

What material is the mount made of?

The E36 reinforced gearbox mount is made of steel with pressed relief shapes and extra reinforcements, fully CNC-made and powder-coated black.

Is the E36 reinforced gearbox mount only for cars with a lot of power?

No. The mount is intended for sports cars, regardless of power output. Even on a rally car with a standard engine, it helps against impacts from below.

How much does the mount weigh?

The E36 reinforced gearbox mount weighs approximately 1.34 kg.

Are rubbers included?

The manufacturer only mentions the mount itself. You buy rubbers for the gearbox separately.

How can I tell that my current mount is worn or bent?

Typical signs are a gear lever that moves back and forth when you accelerate or lift off, clunking noises when pulling away and a gearbox that visibly sags or hangs crooked. Look under the car to see whether the mount is bent or has small cracks around the mounting holes. In that case, an E36 reinforced gearbox mount is a logical replacement.

Can I fit the mount myself?

With a lift or good axle stands, a jack and basic tools, it is a manageable job for a handy DIY mechanic.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.