AST Multipoint Weld-in Roll Cage BMW E46 Touring V1

€967,03 Incl. VAT

AST Multipoint Weld-in Roll Cage BMW E46 Touring V1

This full roll cage for the BMW E46 Touring is custom-built by AST Roll Cages and is welded to the bodyshell at ten points. The V1 is the basic version with main hoop and braces, made from E355 steel and supplied as an unpainted weld-in kit with reinforcement plates and mounting hardware. More welded mounting points than a standard weld-in cage means a more rigid car on track. Delivery time 15 to 35 working days.

Available on back-order|Estimated delivery time: 15 tot 35 werkdagen

SKU: CMBN06728 Category: Brand:

Description

AST Multipoint Weld-in Roll Cage BMW E46 Touring V1

The AST Multipoint Weld-in Roll Cage BMW E46 Touring V1 is a full roll cage for the BMW E46 with five-door Touring bodywork. This Multipoint E46 Touring V1 forms the basis of the multipoint range: a main hoop with braces, welded to the bodyshell at ten points.

The cage is designed and built by AST Roll Cages in Spain, for drivers who are permanently converting their E46 Touring into a drift or track car and who value chassis rigidity over the convenience of a removable cage.

Key benefits

  • Ten welded mounting points on the bodyshell instead of the eight of a standard weld-in cage, so the loads are spread over more locations.
  • More rigid bodyshell that responds more directly to steering and throttle inputs, exactly what you feel when drifting and on track.
  • E355 steel with a 45 mm main hoop and remaining tubes of 40 mm.
  • Custom-designed for the five-door Touring bodyshell, so every tube and every foot plate sits exactly where it should.
  • Gussets and reinforcement plates are included in the kit, so the sheet metal can handle the loads.
  • Complete weld-in kit with bolts, washers, nuts, documentation, fitting instructions and a sticker set.
  • Supplied unpainted, so you decide the colour and finish of your interior yourself.

Suitable for

BMW E46, 5-door Touring

  • BMW E46 Touring (five-door body)
  • Type: multipoint weld-in roll cage, version V1
  • Drifting, track use and rallying

Technical specifications

  • Manufacturer: AST Roll Cages
  • Manufacturer part number: CMBN06728
  • Sunroof: for roofs without a sunroof
  • Headlining: for roofs without headlining
  • Rear anchorage: in the rear suspension area
  • Rear structure layout: X design
  • Type: full roll cage, multipoint weld-in (permanent)
  • Main hoop: E355 steel, 45 mm diameter
  • Secondary structure: E355 steel, 40 mm diameter
  • Foot plates: 3 mm steel, custom-designed for each car
  • Mounting: 10 welded mounting points on the bodyshell
  • Weight: 71 kg (manufacturer’s figure)
  • Finish: unpainted weld-in kit
  • Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set

Fitting and delivery

The cage is built to order; the standard delivery time is 15 to 35 working days. Have it welded in by an experienced welder: each of the ten welded mounting points has to land precisely on the prepared bodywork, and they cannot be undone once fitted.

The entry-level version of the multipoint range for the E46 Touring: a main hoop with braces on ten welded mounting points, for anyone who wants to start with a rigid foundation.

Why choose this Multipoint E46 Touring V1 roll cage?

AST digitises the bodyshell with laser scanners and designs the cage in 3D, so that it fits your car exactly. Instead of universal tubing that has to be trimmed on site, you get a kit that drops straight into the right place. If you want to drive harder later on, moving up to a higher version within the same range remains the logical next step.

Frequently asked questions

What is the difference from a standard weld-in cage?

A standard weld-in cage is welded to the bodyshell at eight points. The Multipoint E46 Touring V1 uses ten, which spreads the load over more locations and makes the chassis more rigid.

What exactly will I receive?

You receive an unpainted weld-in kit with gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and a sticker set. You can paint and weld it in yourself or have your workshop do it.

What is the delivery time?

The standard delivery time for this roll cage is 15 to 35 working days.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight71 kg
Car make

BMW

Model

E46

Reviews

There are no reviews yet.

Be the first to review “AST Multipoint Weld-in Roll Cage BMW E46 Touring V1”
EN

Your Shopping cart

Close