AST Bolt-in Roll Cage BMW E30 Touring V2

€1.388,92 Incl. VAT

AST Bolt-in Roll Cage BMW E30 Touring V2

This full roll cage for the rear-wheel-drive BMW E30 Touring builds on the V1 and adds front reinforcement bars to the bulkhead. This makes the front end of your Touring measurably more rigid and gets the cage ready for serious track work. Six bolted mounting points on welded foot plates, supplied unpainted with connecting sleeves, mounting hardware and fitting instructions. Delivery time 15 to 35 working days.

Available on back-order|Estimated delivery time: 15 tot 35 werkdagen

SKU: CMBN04961 Category: Brand:

Description

AST Bolt-in Roll Cage BMW E30 Touring V2

The AST Bolt-in Roll Cage BMW E30 Touring V2 is a full roll cage for the rear-wheel-drive BMW 3 Series (E30) with 5-door Touring bodywork. This Bolt-in E30 Touring V2 is the V1 with the addition of front reinforcement bars that run all the way to the bulkhead.

The cage is designed and built by AST Roll Cages in Spain, for drivers of a rear-wheel-drive E30 Touring who want a noticeably stiffer chassis as well as protection.

Key benefits

  • Front reinforcement bars to the bulkhead: the difference from the V1 and the key to sharper steering.
  • Stiffer front end, as the loads from the front axle are absorbed into the cage structure via the bars.
  • Main hoop in E355 steel with a diameter of 45 mm, the rest of the structure 40 mm.
  • Six bolting points on six 3 mm steel foot plates welded to the bodyshell.
  • Supplied in sections via connecting sleeves, so the long bars fit through the door opening.
  • Laser-scan fit: the cage was designed in 3D on the E30 Touring.
  • Complete package with reinforcement plates, bolts, washers, nuts, documentation, fitting instructions and sticker set.

Suitable for

BMW E30 3 Series, 5-door Touring

  • BMW E30 3 Series 5-door Touring
  • Only the rear-wheel-drive E30 Touring; the all-wheel-drive 325iX has its own AWD version
  • Type: bolt-in roll cage, version V2
  • Drifting, track use and rallying

Technical specifications

  • Manufacturer: AST Roll Cages
  • Manufacturer part number: CMBN04961
  • Sunroof: for roofs without a sunroof
  • Headlining: for roofs without headlining
  • Rear anchorage: at the wheel arch
  • Rear structure layout: X design
  • Type: full roll cage, bolt-in on welded foot plates
  • Main hoop: E355 steel, 45 mm diameter
  • Secondary structure: E355 steel, 40 mm diameter
  • Foot plates: 3 mm steel, custom-designed for each car
  • Mounting: 6 bolting points on 6 foot plates welded to the bodyshell
  • Weight: 210 kg (manufacturer’s figure)
  • Finish: welded and unpainted, split into sections via connecting sleeves
  • Included: welded structure, connecting sleeves, reinforcement plates, bolts, washers, nuts, documentation, fitting instructions and sticker set

Fitting and delivery

The cage is built to order; the standard delivery time is 15 to 35 working days. The six foot plates are welded to the bodyshell, after which the cage itself is bolted onto those plates. When preparing, allow for the dashboard and the wiring around the bulkhead, as the front bars run alongside them. AST digitises the bodyshell with laser scanners and designs the cage in 3D, so it fits your car exactly.

The V2 takes the E30 Touring from basic protection to a noticeably stiffer car, thanks to the continuous bars to the bulkhead.

Why choose this Bolt-in E30 Touring V2 roll cage?

The Bolt-in E30 Touring V2 is the logical next step for anyone who takes their car on track more often. The front reinforcement bars connect the cage to the bulkhead, so the bodyshell flexes less under load and the steering response becomes sharper. At the same time, you keep all the advantages of a full roll cage that bolts onto welded foot plates.

Frequently asked questions

What is the difference from the V1?

The Bolt-in E30 Touring V2 has the same main hoop and backstays as the V1, but adds front reinforcement bars that run all the way to the bulkhead. This provides extra torsional rigidity at the front.

Is this version suitable for the all-wheel-drive 325iX?

No. This version is made for the rear-wheel-drive BMW E30 Touring. For the all-wheel-drive E30 325iX, AST offers a separate AWD version with a modified floor layout.

Does any welding need to be done on my car?

Yes. The six foot plates are welded to the bodyshell; the cage itself is then bolted onto those plates. Have the welding carried out by an experienced specialist.

What is the delivery time?

The standard delivery time for this roll cage is 15 to 35 working days.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight210 kg
Car make

BMW

Model

E30

Reviews

There are no reviews yet.

Be the first to review “AST Bolt-in Roll Cage BMW E30 Touring V2”
EN

Your Shopping cart

Close