AST Weld-in Roll Cage BMW E24 Coupé V5

€1.265,95 Incl. VAT

AST Weld-in Roll Cage BMW E24 Coupé V5

The most comprehensively equipped full roll cage for the BMW 6 Series E24 Coupé, with the complete set of bars. Permanently welded in at 8 mounting points, in E355 steel, custom-designed for each car after a laser scan of the bodyshell. Supplied as an unpainted weld-in kit with gussets, reinforcement plates and mounting hardware. Delivery time 15 to 35 working days.

Available on back-order|Estimated delivery time: 15 tot 35 werkdagen

SKU: CMBN07812 Category: Brand:

Description

AST Weld-in Roll Cage BMW E24 Coupé V5

The AST Weld-in Roll Cage BMW E24 Coupé V5 is a full roll cage for the BMW 6 Series E24 with 2-door coupé bodywork. This Weld-in E24 Coupé V5 is the highest specification level in the weld-in range and comes with the complete set of bars.

The cage is designed and built by AST Roll Cages in Spain, for competition cars where no compromises are made and the bodyshell needs to be made as rigid as possible.

Key benefits

  • Complete set of bars: all the bars from the lower versions are included; nothing needs to be added afterwards.
  • Maximum torsional rigidity: the fully continuous structure links the front section, the door area and the rear together.
  • 8 welded mounting points: the cage becomes a permanent part of the bodyshell.
  • E355 steel: 45 mm main hoop, 40 mm for the other tubes.
  • Foot plates in 3 mm steel: designed specifically for the E24.
  • Laser scan as the basis: a fit you will not achieve with a universal cage.
  • Unpainted weld-in kit: complete with gussets and mounting hardware.

Suitable for

BMW 6 Series E24, 2-door Coupé

  • BMW 6 Series E24 2-door Coupé, years 1976 to 1989
  • Type: weld-in roll cage, version V5
  • Drifting, track use and rallying

Technical specifications

  • Manufacturer: AST Roll Cages
  • Manufacturer part number: CMBN07812
  • Sunroof: for roofs without a sunroof
  • Headlining: for roofs without headlining
  • Rear anchorage: in the rear suspension area
  • Rear structure layout: X design
  • Type: full roll cage, weld-in (permanent)
  • Main hoop: E355 steel, 45 mm diameter
  • Secondary structure: E355 steel, 40 mm diameter
  • Foot plates: 3 mm steel, custom-designed for each car
  • Mounting: 8 welded mounting points on the bodyshell
  • Weight: 71 kg (manufacturer’s figure)
  • Finish: unpainted weld-in kit
  • Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set

Fitting and delivery

The cage is built to order; the standard delivery time is 15 to 35 working days. Expect the longest fitting time of the entire range: the interior has to come out completely, and the welding sequence determines whether everything stays free of stress.

Anyone turning their E24 into a genuine competition car starts with the complete set of bars of the V5.

Why choose this Weld-in E24 Coupé V5 roll cage?

Welding extra bars into a cage that is already in the car takes more work than getting it right in one go. The V5 delivers the complete set at once, with a continuous structure that stiffens the chassis of the big coupé as a whole. This translates into more stable handling and more predictable behaviour at the limit.

Frequently asked questions

What makes the V5 different from the V4?

The Weld-in E24 Coupé V5 contains the complete set of bars in the range. Where the V4 stops at the extra diagonal brace and harness bar, on the V5 the structure is extended over the full length of the interior.

Is this roll cage FIA-approved?

AST states on its product page that this structure has been designed to FIA Appendix J for the BMW 633 CSi and 635 CSi. No homologation number is listed for this item, so always check the regulations of your own federation or sporting body before you enter an event.

What is the delivery time?

The standard delivery time for this roll cage is 15 to 35 working days.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight71 kg
Car make

BMW

Model

E24

Reviews

There are no reviews yet.

Be the first to review “AST Weld-in Roll Cage BMW E24 Coupé V5”
EN

Your Shopping cart

Close