AST Multipoint Weld-in Roll Cage Nissan Silvia PS13 Coupé V3 NASCAR door

€1.476,89 Incl. VAT

AST Multipoint Weld-in Roll Cage Nissan Silvia PS13 Coupé V3 NASCAR door

This full roll cage from AST Roll Cages is permanently welded into the two-door Nissan Silvia PS13 at ten welded mounting points instead of eight, with NASCAR door bars in the door. Designed specifically for drift use, 65 kg. Specification level V3 with main hoop, braces and door bars. Supplied as an unpainted weld-in kit with gussets, mounting hardware, fitting instructions and a T-joint weld sample. Delivery time 15 to 35 working days.

Available on back-order|Estimated delivery time: 15 tot 35 werkdagen

SKU: CMBN03632 Category: Brand:

Description

AST Multipoint Weld-in Roll Cage Nissan Silvia PS13 Coupé V3 NASCAR door

The AST Multipoint Weld-in Roll Cage Nissan Silvia PS13 Coupé V3 NASCAR Door Bars is a full roll cage that is permanently welded into the two-door Nissan Silvia PS13, at ten welded mounting points and with NASCAR door bars. This Multipoint PS13 V3 NASCAR is designated by AST as a drift version.

The difference from an eight-point weld-in cage lies in the load distribution. With ten welded mounting points, the forces are fed into the bodyshell at more locations, so each point is under less stress. On a PS13 that is already thirty years old, that counts for even more.

Key benefits

  • Ten welded mounting points: two more than a standard weld-in cage, for better load distribution.
  • NASCAR door bars: several curved tubes in the door for much greater side protection.
  • Designated by AST as a drift version: designed specifically for drift use.
  • Specification level V3: main hoop with braces and door bars, without the extra diagonal brace of the V4.
  • E355 steel: main hoop with a diameter of 45 mm, the rest of the structure 40 mm.
  • Custom reinforcement plates: 3 mm thick steel, designed for each specific car rather than as a universal part.
  • Exact fit: the bodyshell is digitised with laser scanners before the cage is designed in 3D.
  • Complete weld-in kit: includes gussets, mounting hardware, documentation, fitting instructions, a sticker set and a T-joint weld sample.

Suitable for

Nissan Silvia PS13, 2-door coupé

  • Nissan Silvia PS13 Coupé, also known as the 240SX coupé
  • Type: full roll cage, multipoint weld-in, version V3 with NASCAR door bars
  • Drifting first and foremost, as well as track and competition

A multipoint cage requires more modifications to the interior than a standard weld-in cage. AST designs separate cages for the two-door PS13 coupé and the three-door S13 hatchback; this one fits the coupé.

Technical specifications

  • Manufacturer: AST Roll Cages
  • Manufacturer part number: CMBN03632
  • Sunroof: for roofs without a sunroof
  • Headlining: for roofs without headlining
  • Rear anchorage: in the rear suspension area
  • Rear structure layout: V design
  • Type: full roll cage, permanently welded in, multipoint, with NASCAR door bars
  • Main hoop: E355 steel, 45 mm diameter
  • Secondary structure: E355 steel, 40 mm diameter
  • Reinforcement plates: 3 mm steel, custom-designed for each car
  • Mounting: 10 welded mounting points on the bodyshell
  • Weight: 210 kg (manufacturer’s figure)
  • Finish: supplied as a weld-in kit, unpainted
  • Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions, sticker set and a T-joint weld sample

Fitting and delivery

The cage is built to order; the standard delivery time is 15 to 35 working days. The weld-in kit is assembled in the car and welded to the bodyshell at ten points. This means that trim, insulation and sometimes wiring have to be removed in more places than with an eight-point cage. The NASCAR door bars extend right into the door, so measure beforehand whether your seating position and helmet still clear them. Have the welding done by someone with roll cage experience. This cage is intended for track and competition use; check the regulations of your own sporting organisation beforehand, as not every class allows NASCAR door bars.

Ten welded mounting points instead of eight: less stress per point and a firmer hold on a bodyshell that has to take a lot of punishment.

Why choose this Multipoint PS13 V3 NASCAR?

This cage weighs exactly the same as the weld-in V5 NASCAR, 65 kg, but is built very differently. The V5 has the full set of bars on eight welded mounting points; this one has less tubing on ten welded mounting points. For a difference of around forty euros, you are therefore choosing between more structure and wider load distribution. On an old PS13 where the panels are no longer new everywhere, that choice often comes down in favour of the extra mounting points.

Frequently asked questions

What is the difference from a standard weld-in cage?

The number of welded mounting points. The Multipoint PS13 V3 NASCAR is attached at ten points, a standard weld-in cage at eight.

What is the difference from the multipoint V4 NASCAR?

The V4 has an extra diagonal brace and harness bar. The V3 sticks to the main hoop with braces and door bars, and is lighter at 65 kg versus 72 kg.

Does this cage also fit the three-door S13 hatchback?

No. AST designs a separate range for the hatchback. This cage is made for the two-door coupé.

Can this cage be removed later?

No, it is permanently welded to the bodyshell. For a removable solution, look at the half cage or the bolt-in range.

What is the delivery time?

The standard delivery time for this roll cage is 15 to 35 working days, as AST builds every cage to order.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight210 kg
Car make

Nissan

Model

Reviews

There are no reviews yet.

Be the first to review “AST Multipoint Weld-in Roll Cage Nissan Silvia PS13 Coupé V3 NASCAR door”
EN

Your Shopping cart

Close