Shop

Description

AST Weld-in Roll Cage Nissan Almera N15 3-door Hatchback V4

The Weld-in Roll Cage Almera V4 is a full, permanently welded-in roll cage for the Nissan Almera N15 3-door hatchback and one of the heaviest versions in the weld-in range. AST Roll Cages custom-builds this 8-point weld-in cage using laser scanning and 3D design, and supplies it as a weld-in kit.

Compared with the V3, the V4 adds an extra diagonal brace and a harness bar. The harness bar provides a fixed anchor point for the harnesses, and the diagonal further increases rigidity.

Key benefits

• Extra diagonal brace and harness bar: a heavier bar layout than the V3.
• Harness bar: fixed anchorage point for a four-point or six-point harness.
• Permanently welded in: 8 welded mounting points for maximum rigidity.
• Custom-made from a laser scan: an exact fit for the Almera N15 3-door hatchback.
• E355 steel: main hoop 45 mm, other tubes 40 mm.
• Supplied as a weld-in kit: with gussets.
• Supplied unpainted with an X-design rear structure.

Suitable for

Nissan Almera N15 3-door hatchback

• Track days, autocross and circuit use
• Drivers who want a welded-in cage with a harness bar
• As a heavy version just below the complete V5

Technical specifications

• Manufacturer: AST Roll Cages
• Part number: CMBN07036
• Type: full roll cage, 8-point, permanently welded in
• Material: E355 steel, main hoop 45 mm, secondary structure 40 mm
• Reinforcement plates: 3 mm steel, custom-made for each car
• Mounting: 8 welded mounting points on the bodyshell
• Sunroof: for roofs without a sunroof
• Headlining: for roofs without headlining
• Rear anchorage: in the rear suspension area
• Rear structure layout: X design
• Weight: 210 kg
• Finish: unpainted
• Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set

Fitting and delivery

The cage is welded to the bodyshell at eight points. The door bars and the harness bar run through the interior; allow for the space this takes up. Leave the welding work to an experienced mechanic or a specialist workshop. The cage is supplied unpainted. The delivery time is 15 to 35 working days, because every cage is custom-built to order.

A heavy welded-in full roll cage for the Almera N15, with an extra diagonal brace and a harness bar.

Why choose this Weld-in Roll Cage Almera V4?

The Weld-in Roll Cage Almera V4 adds an extra diagonal brace and a harness bar to the welded-in cage. The same laser-scan-based fit and E355 structural steel, with an anchor point for your harnesses and a higher level of rigidity than the V3. Intended for track and competition use: always check the regulations of your own governing body or organiser.

Frequently asked questions

Is this a half or a full roll cage?

This is a full roll cage. It covers both the front and rear compartments of the Nissan Almera N15.

What is the difference from the V3?

The Weld-in Roll Cage Almera V4 has an extra diagonal brace and a harness bar for the harnesses, which makes it stiffer than the V3.

Is the cage welded in?

Yes. This is a weld-in cage that is welded to the bodyshell at eight points.

How long does delivery take?

The cage is custom-built; allow 15 to 35 working days.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.