Description
Adamat Toyota 1UZ/3UZ-FE adapter plate with flywheel for BMW S5D, GS5 and GS6
With this Toyota 1UZ adapter kit from Adamat Performance you can mount a manual BMW gearbox behind a Toyota 1UZ-FE or 3UZ-FE V8. The kit consists of a duralumin adapter plate, a light CNC-machined 6.4 kg flywheel and all the bolts needed to connect engine, adapter and gearbox.
A clutch is deliberately not included. This way you choose the clutch disc and pressure plate that suit the torque of your engine yourself, or you use a clutch you already have.
When ordering, you specify which BMW gearbox you use. Adamat makes the adapter and flywheel to fit it. For special details, such as your chassis or a different engine tilt, there is a note field.
Key benefits
- Basis for every UZ-to-BMW swap: adapter plate, flywheel and bolts in one kit
- Flywheel of only 6.4 kg, CNC-machined from the AlZnMg+Ti aerospace alloy, stronger than the steel of cheap flywheels
- Replaceable cast iron friction surface: when it is worn, you only replace the insert
- Good heat dissipation: the light flywheel acts as a heat sink and does not warp as quickly as a steel one
- Ring gear already fitted on the flywheel
- Adapter plate made of duralumin 2017A, light and stiff
- Dynamically balanced flywheel for a smooth-running engine
- Tested in street cars and in heavily loaded drift and off-road engines
Suitable for
Engine: Toyota 1UZ-FE and 3UZ-FE V8
Gearbox: manual BMW gearboxes
| BMW gearbox | From chassis | Original engine | Input shaft |
|---|---|---|---|
| GS6-53BZ (6-speed, also xDrive GS6X53BZ) | E82, E90-E93, E60-E64 | N54 | 32,5×35-26N |
| GS6-53DZ (6-speed, also xDrive GS6X53DZ) | E46, E82, E90-E93, E60-E64 | M57N, M57N2 | 32,5×35-26N |
| GS6-37BZ (6-speed, also xDrive GS6X37BZ) | E46, E39, E85, E86, E81, E87, E90, E91, E60, E61 | N52, M54 | 23,13×29,13-22N |
| GS6-37DZ (6-speed, also xDrive GS6X37DZ) | E46, E39, E85, E86, E81, E87, E90, E91, E60, E61 | M47, M47N, M47N2, N47, N47N2 | 23,13×29,13-22N |
| GS5-39DZ (5-speed) | E46, E39 | M57 | 28×35-10N |
| S5D-320Z, S5D-310Z, S5D-260Z (5-speed) | E30, E36, E34, E39, E38, E46 | M50, M52, S50, S52 | 23×29-10N |
If your gearbox is not listed, choose “Other gearbox” and enter the code in the note. We will then consult with Adamat, as they make almost every variant.
Technical specifications
- Manufacturer: Adamat Performance (Poland)
- Part number: ADM-176
- Engine: Toyota 1UZ-FE and 3UZ-FE
- Adapter plate: duralumin 2017A
- Flywheel: single-mass, AlZnMg+Ti, CNC-machined, 6.4 kg, dynamically balanced
- Friction surface: replaceable cast iron insert
- Ring gear: fitted on the flywheel
- Pilot bearing: depending on the gearbox in the flywheel, or a centring pin for the original bearing in the input shaft
- Bolts: class 12.9 flywheel bolts, bolts for adapter and gearbox
- Not included: clutch disc, pressure plate and release bearing
Installation and delivery
Depending on your gearbox, the pilot bearing sits in the flywheel or you get a centring pin for the bearing that is already in the input shaft of the gearbox. That is why it is important to choose the correct gearbox when ordering.
Adamat makes the kit to order for your gearbox. The lead time is 5 to 7 weeks.
The foundation of your UZ swap: an adapter and a light flywheel made to fit your BMW gearbox, with the freedom to choose your own clutch.
Why choose this Toyota 1UZ adapter kit?
Adamat Performance uses a special light aerospace alloy instead of steel for its flywheels. According to Adamat, its strength is even higher than that of the nodular cast iron used to make crankshafts. Steel flywheels are often not specially heat-treated and can warp due to overheating. This flywheel, by contrast, dissipates heat quickly, so it stays flat for a long time.
Frequently asked questions
Is a clutch included in this kit?
No, this Toyota 1UZ adapter kit contains the adapter plate, the flywheel and the bolts. Clutch disc, pressure plate and release bearing are purchased separately. Contact us if you are looking for a suitable clutch.
How does Adamat know which gearbox I have?
You choose your gearbox from the selection list when ordering. If it is not listed, choose “Other gearbox” and state the code in the note field.
Does the kit also fit a 3UZ-FE?
Yes, the kit is made for both the 1UZ-FE and the 3UZ-FE.
What is the lead time?
Adamat makes the kit to order. Allow 5 to 7 weeks.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.












Reviews
There are no reviews yet.