Description
Adamat BMW B58/S58 twin-disc clutch STAGE1 1056 Nm for BMW GS6-45BZ, GS6L55TZ and GS6-53DZ
This B58 twin-disc clutch from Adamat Performance replaces the original clutch of a BMW B58B30 or S58B30A with manual gearbox. It fits the original GS6-45BZ of the B58 and the GS6L55TZ of the S58, as well as the GS6-45DZ and the GS6-53DZ JGG, JGL and HB7. The STAGE1 version is made for engines up to 1056 Nm.
The kit contains a light monolithic flywheel of 6.9 kg with starter ring gear, two 240 mm Performance discs, an alloy steel intermediate plate, a SACHS pressure plate, a SACHS release bearing, class 12.9 flywheel bolts and a centring pin. The complete clutch weighs 17.9 kg.
STAGE1 works well in street cars that go on track now and then. If you drive harder or your engine makes more torque, choose a higher stage when ordering, up to 1700 Nm.
Key benefits
- Fits the original gearbox: GS6-45BZ (B58) and GS6L55TZ (S58), also GS6-45DZ and GS6-53DZ JGG, JGL, HB7
- Five stages from 1056 Nm to 1700 Nm, selectable when ordering
- Monolithic flywheel made of AlZnMg+Ti, an aerospace alloy with the strength of 42CrMo4 steel, including starter ring gear
- 6.9 kg flywheel, complete clutch 17.9 kg
- Two 240 mm Performance discs, with LUK 8090S Kevlar lining on STAGE1
- Patented spring system that damps vibrations of the discs and centres the intermediate plate when disengaging, important for sequential gearboxes and fast shifting
- SACHS pressure plate 3082311341 and SACHS release bearing 3189600090
- Balanced in two steps on a CIMAT machine: flywheel and pressure plate separately, then together
Suitable for
Engine: BMW B58B30A, B58B30B, B58B30C and S58B30A
Gearbox: original BMW GS6-45BZ (B58) and GS6L55TZ (S58), also GS6-45DZ and GS6-53DZ JGG, JGL, HB7
| Stage | Maximum torque | Disc lining | Pressure plate |
|---|---|---|---|
| STAGE1 | 1056 Nm | LUK 8090S with Kevlar | SACHS 3082311341 |
| STAGE2 | 1150 Nm | sintered MIBA, 4 pads | SACHS 3082311341 |
| STAGE3 | 1300 Nm | LUK 8090S with Kevlar | SACHS Racing 883082.001243 |
| STAGE4 | 1570 Nm | 100% Kevlar MAKLAND | SACHS Racing 883082.001243 |
| STAGE5 | 1700 Nm | sintered MIBA, 4 pads | SACHS Racing 883082.001243 |
Adamat’s technical table lists slightly lower values for daily use for STAGE1 (1040 Nm) and STAGE4 (1540 Nm). If your gearbox is not in the list, choose “Other gearbox” and enter the code in the note field. We will then check with Adamat what is possible.
Technical specifications
- Manufacturer: Adamat Performance (Poland)
- Article number: ADM-B58S58OEM-ST1
- Engine: BMW B58B30A, B58B30B, B58B30C, S58B30A
- Maximum torque: STAGE1 1056 Nm, STAGE2 1150 Nm, STAGE3 1300 Nm, STAGE4 1570 Nm, STAGE5 1700 Nm
- Flywheel: monolithic, AlZnMg+Ti, 6.9 kg, with starter ring gear
- Total clutch weight: 17.9 kg
- Clutch discs: 2x 240 mm Performance, lining according to stage
- Spline: 32,5×35-26N
- Intermediate plate: alloy structural steel, wear-resistant and heat-resistant
- Pressure plate: SACHS 3082311341 (STAGE1 and 2), SACHS Racing 883082.001243 (STAGE3 to 5)
- Release bearing: SACHS 3189600090
- Flywheel bolts: class 12.9
- Included: flywheel, 2 clutch discs, intermediate plate, pressure plate, release bearing, flywheel bolts and centring pin; installation manual as PDF
Installation and delivery
Because the kit fits the original gearbox, no adapter plate is needed. The flywheel goes onto the crankshaft, then you align the discs with the centring pin and bolt the pressure plate in place. Adamat has an installation manual as PDF for this clutch.
When ordering, choose your gearbox and the clutch version. If you want to let Adamat know something, for example about your chassis or engine code, use the note field. Adamat makes the kit to order. The lead time is 5 to 7 weeks.
A twin-disc clutch for your B58 or S58 that fits the original gearbox and goes up to 1700 Nm in five stages.
Why choose this B58 twin-disc clutch?
With two discs you get more friction surface within the same 240 mm diameter. Adamat combines this with a light flywheel made of an aerospace alloy and a patented spring system that keeps the intermediate plate steady and centres it when disengaging. Because you choose from five stages, the clutch suits a street car with more horsepower than stock just as well as a drift, drag or track car.
Frequently asked questions
Does this B58 twin-disc clutch fit my original gearbox?
Yes, this B58 twin-disc clutch is made for the original GS6-45BZ of the B58 and the GS6L55TZ of the S58. You can also choose the GS6-45DZ and the GS6-53DZ JGG, JGL and HB7.
Which stage do I need?
STAGE1 (1056 Nm) is intended for street cars with the occasional track day. STAGE2 (1150 Nm) has sintered discs for track and semi-pro drift, STAGE3 (1300 Nm) a SACHS Racing pressure plate for a strong street car, STAGE4 (1570 Nm) 100% Kevlar discs for heavy off-road use and STAGE5 (1700 Nm) sintered discs with SACHS Racing pressure plate for pro drift, drag and racing.
Does the kit also work on the S58?
Yes, on the S58B30A with the original GS6L55TZ.
What is included in the kit?
Flywheel with starter ring gear, two 240 mm clutch discs, intermediate plate, SACHS pressure plate, SACHS release bearing, class 12.9 flywheel bolts and a centring pin.
What is the lead time?
Adamat makes the kit to order. Allow for 5 to 7 weeks.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.
















Reviews
There are no reviews yet.